Installing the Palmrest
1.Align the palmrest to its original position on the computer and press on the positions indicated until it snaps in place.
2.Tighten the screw that secures the palmrest to the computer.
3.Connect the following cables:
a)bluetooth module
b)power button
c)touchpad
d)media board
e)speaker
4.Affix the adhesive tape that secures the media card cable, speaker cable and touchpad cable.
5.Tighten the screw at the bottom of the computer.
6.Connect the smart card cable and affix the adhesive tape that secures it to the palmrest.
7.Install the:
a)secondary hard drive
b)primary hard drive
c)optical drive
d)keyboard
e)keyboard trim
f)base cover
g)battery
8.Follow the procedures in After Working Inside Your Computer.
Removing the ExpressCard Module
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
a)ExpressCard
b)battery
c)base cover
d)keyboard trim
e)keyboard
f)optical drive
g)primary and secondary hard drive
h)palm rest
3.Disconnect the ExpressCard cables from both the system board and the smart card.
39