4.Remove the screws that secure the ExpressCard module to the computer and remove the ExpressCard module.
Installing the ExpressCard Module
1.Insert the ExpressCard module into its compartment.
2.Tighten the screws to secure the ExpressCard module to the computer
3.Connect the ExpressCard cables to the system board and the smart card.
4.Install the:
a)palm rest
b)primary and secondary hard drive
c)optical drive
d)keyboard
e)keyboard trim
f)base cover
g)battery
h)ExpressCard
5.Follow the procedures in After Working Inside Your Computer.
Removing the Heat Sink
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the:
40