Back to Contents Page
Power Supply
Dell™ Vostro™ 230s Service
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Power Supply
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the cover.
3.Remove the chassis support bracket.
4.Disconnect all the power cables from the system board and the drives.
5.Remove the screws that secure the power supply to the computer.
6.Press down on the power supply release latch and slide the power supply back slightly.
7.Pivot the power supply away from the chassis and lift it up and out of the computer.
Replacing the Power Supply
To replace the power supply, perform the above steps in reverse order.
Back to Contents Page