Dell 230S specifications Removing the Rubber Foot, Replacing the Rubber Foot

Back to Contents Page

Rubber Foot

Dell™ Vostro™ 230s Service Manual—Slim Tower

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Rubber Foot

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the cover.

3.Remove the chassis support bracket.

4.Remove the power supply.

5.Rotate the rubber foot and remove it from the computer.

Replacing the Rubber Foot

To replace the rubber foot, perform the above steps in reverse order.

Back to Contents Page