Dell 340 manual Replacing the Chassis Intrusion Switch, Resetting the Chassis Intrusion Detector

Replacing the Chassis Intrusion Switch

To replace the chassis intrusion switch, follow the "Removing the Chassis Intrusion Switch" procedures in reverse order.

Resetting the Chassis Intrusion Detector

1.Enter system setup by pressing <F2> during the computer's POST.

For instructions on using system setup, see the User's Guide.

2.Under the System Security tab, reset the Chassis Intrusion option by pressing the left- or right-arrow key to select Reset. Change the setting to Enabled, Enabled-Silent, or Disabled.

NOTE: The default is Enabled-Silent.

NOTE: If a setup password has been assigned by someone else, contact the network administrator for information on resetting the chassis intrusion detector.

3.Press <Alt><B> to restart the computer and implement your changes.

Back to Contents Page