PSWD | Password jumper |
|
|
RIMM_n | Memory module socket |
SERIALn | Serial connectors (2) |
|
|
SCSI | Auxiliary |
|
|
SPEAKER | System board speaker |
|
|
STANDBY_LED | Standby power light |
|
|
TELE | Telephony (TAPI) connector |
|
|
USB_LAN | Network and Port 1 USB (2) connectors |
|
|
Jumpers
System Board Jumpers
NOTICE: Before changing a jumper setting, verify that the standby power light on the system board has turned off. Otherwise, damage to your computer or unpredictable results may occur. To locate this light, see "System Board Components."
To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.
System-Board Jumper Settings
Jumper | Setting | Description |
PSWD | (default) | Password features are enabled. |
|
|
|
|
| Password features are disabled. |
|
|
|
CLR CM |
| Normal |
| (pins 1 and 2) |
|
|
|
|
|
| CLR CM |
(pins 2 and 3)
jumpered unjumpered
NOTE: The CLR CM settings are also located on the system board next to the AGP card clip tab.