Dell 390 owner manual Installing The Heat Sink And Processor

Installing The Heat Sink And Processor

Insert the processor into the processor socket. Ensure the processor is	.1
.properly seated
.Lower the processor cover	.2
Press the release lever down and then move it inward to secure it with the	.3
.retention hook
.Place the heat sink assembly into the chassis	.4
Tighten the captive screws to secure the heat-sink assembly to the system	.5
.board
Secure the Input/Output Board or the FlyWire cable to the routing channel	.6
.on the heat sink
.Connect the heat sink assembly cable to the system board	.7
.Install the drive cage	.8
.Install the front bezel	.9
.Install the cover	.10
.Follow the procedures in After Working Inside Your Computer	.11

30