6 Attaching the Cable Cover
NOTICE: If you are installing the computer under a desktop or tabletop, do not attach the cable cover until the computer is firmly attached to the mounting plate (see Step 7, "Attaching the Stand to the Mounting Plate" on page 18).
NOTICE: If you use the stand on your computer, attach the stand before attaching the cable cover.
security cable slot
Do not place the computer face- down on the bezel
NOTICE: When attaching the cable cover, do not place the computer face- down so that the surface comes in contact with a hard surface. Doing so may press the power button and may scratch the face of the computer.
1Attach all of the cables to the back of the computer.
2Hold the bottom piece of the cable cover and align the four tabs with the four slots on the computer’s back panel.
3Insert the tabs into the slots and slide the piece toward the diagnostic lights (see the illustration) until it is securely positioned.
4Grasp the top piece of the cable cover and align the two tabs with the two slots in the computer’s back panel.
Setup and Quick Reference Guide
17