Replacing the Media Card Reader
1Follow the instructions in "Before You Begin" on page 13.
2Gently slide the Media Card Reader guides into the slots in the top panel.
3Replace the two screws that secure the Media Card Reader to the front panel.
4Connect the Media Card Reader cable to the system board connector F_USB1 (see "System Board Components" on page 10).
5Replace the top cover (see "Replacing the Top Cover" on page 59).
6Replace the optical drive (see "Replacing the Optical Drive" on page 51).
7Replace the front bezel (see "Replacing the Front Bezel" on page 29).
8Replace the computer cover (see "Replacing the Computer Cover" on page 18).
9Connect your computer and devices to electrical outlets, and then turn them on.
56
Drives