Replacing the Front USB Panel
CAUTION: To avoid damage to the cable connectors and the cable routing clips, carefully slide the front USB panel into the front USB panel clamp slot.
1Follow the instructions in "Before You Begin" on page 13.
2Align and slide the front USB panel clamps into the front USB panel clamp slot.
3Replace the screw that secures the front USB panel to the front panel.
4Connect the front USB panel cables to the system board connector F_USB2 (see "System Board Components" on page 10).
5Replace the front bezel (see "Replacing the Front Bezel" on page 29).
6Replace the computer cover (see "Replacing the Computer Cover" on page 18).
7Connect your computer and devices to electrical outlets, and turn them on.
Front USB Panel
67