Dell 610 manual 3RZHU6RXUFH,QWHUUXSWLRQV

Each Dell system, when operating, is designed to withstand 0.25 G (half-sine wave) at a sweep of 3 to 200 hertz (Hz) for 30 minutes. In storage, the system can withstand 0.5 G at 3 to 200 Hz for 30 minutes.

3RZHU￿6RXUFH￿,QWHUUXSWLRQV

Computer systems are especially sensitive to variations in voltage supplied by the AC power source. Overvoltage, undervoltage, and transients (or spikes) can erase data from memory or even cause components to fail. To protect against these types of problems, power cables should always be properly grounded and one or both of the following methods should be used:

‡Use one of the power protection devices described in the following section, “Power Protection Devices.”

‡Place the system on a dedicated power circuit (rather than having it share a cir- cuit with other heavy electrical equipment). In general, do not allow the system to share a circuit with any of the following:

—Kitchen appliances

—Copier machines

—Air conditioners

—Vacuum cleaners

—Space heaters

—Power tools

—Teletype machines

—Adding machines

—Laser printers

—Facsimile machines

—Any other motorized equipment

Besides these appliances, the greatest threat to a system’s supply of power are surges or blackouts caused by electrical storms. Whenever possible, turn off the com- puter and any peripherals and unplug them from their power sources during thunderstorms.

If a blackout occurs—even a temporary one—while the system is turned on, turn off the system immediately and disconnect it from its power source. Leaving the system on may cause problems when the power is restored; all other appliances left on in the area can create large voltage spikes that can damage the system.

D-8Dell Precision 610 Mini Tower Systems User’s Guide