Dell 5100C specifications

1	link integrity light	• Green — A good connection exists between a 10-Mbps
		network and the computer.
		• Orange — A good connection exists between a 100-Mbps
		network and the computer.
		• Off — The computer is not detecting a physical connection
		to the network.
2	network adapter	To attach your computer to a network or broadband device,
	connector	connect one end of a network cable to either a network port or
		your network or broadband device. Connect the other end of the
		network cable to the network adapter connector on the back
		panel of your computer. A click indicates that the network cable
		has been securely attached.
		NOTE: Do not plug a telephone cable into the network connector.
		On computers with a network connector card, use the connector
		on the card.
		It is recommended that you use Category 5 wiring and connectors
		for your network. If you must use Category 3 wiring, force the
		network speed to 10 Mbps to ensure reliable operation.
3	network activity light	Flashes a yellow light when the computer is transmitting or
		receiving network data. A high volume of network traffic may
		make this light appear to be in a steady "on" state.
4	modem connector	Use the modem connector to connect your computer to the
		Internet.
5	surround sound	Use the black surround sound connector to attach multichannel-
	connector	capable speakers.
6	line-in connector	Use the blue line-in connector to attach a record/playback device
		such as a cassette player, CD player, or VCR.
		On computers with a sound card, use the connector on the card.
7	line-out connector	Use the green line-out connector to attach headphones and most
		speakers with integrated amplifiers.
		On computers with a sound card, use the connector on the card.
8	microphone/side-	Use the pink and silver connector to attach a personal computer
	surround sound	microphone for voice or musical input into a sound or telephony
	connector	program.
		On computers with a sound card, the microphone connector is on
		the card.
		The side-surround output provides enhanced surround audio for
		computers with 7.1 speakers.
9	center/LFE connector	LFE (Low Frequency Effects) Audio channel found in digital
		surround sound audio schemes that carries only low frequency
		information of 80 Hz and below. The LFE channel drives a
		subwoofer to provide extremely low bass extension. Systems not
		using subwoofers can shunt the LFE information to the main
		speakers in the surround sound set-up.
10	S/PDIF connector	This connector is used to transmit digital audio without going
		through an analog audio conversion process.
11	VGA connector	If your monitor has a VGA connector, plug it into a VGA connector
		on the computer. Use this VGA connector if you do not have a PCI
		Express video card.
12	USB 2.0 connectors	Use the back USB connectors for devices that typically remain
	(5)	connected, such as printers and keyboards.
		It is recommended that you use the back USB connectors for
		devices that typically remain connected, such as printers,
		keyboards, and mice, or for bootable USB devices, which may not
		function properly if attached to the front connectors.
13	IEEE 1394 connector	Attach high-speed serial multimedia devices, such as digital video
		cameras.