Dell 7010 manual Media Card Reader MCR, Mt/Dt, 19 in 1 Media Card Reader

DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.2

MEDIA CARD READER (MCR)

NOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and may require a slim line optical drive depending on selectable configuration. MCR is not available on the SFF and USFF chassis.

19 IN 1 MEDIA CARD READER	MT/DT
External Dimensions inches/(centimeters)	3.99/(10.13cm)/1.0/(2.54cm)
(With Bezel – W x H)
Weight (max) pounds/kilograms	~155g
Interface type and speed	USB 2.0, 480Mb/s
Media Supported ( maximum capacity supported will vary by Flash Media Types)
	CF I
	CF II
	Micro Drive (MD)
	Secure Digital (SD)
	SDHC
	Mini Secure Digital (mini-SD)
	Micro Secure Digital (Micro-SD)(with adapter)
	Multi Media Card (MMC)
	RS Multi Media Card (RS-MMC)
Media Supported	Multi Media Card plus (MMC plus)
	RS Multi Media Card plus (RS-MMC plus)
	Multi Media Card Micro(MMC Micro) (with adapter)
	Memory Stick (MS)
	Memory Stick Pro(MS Pro)
	Memory Stick Pro Duo (MS Pro Duo)
	Memory Stick Duo (MS-Duo)
	Memory Stick Micro(MS Micro)(M2) (with adapter)
	Smart Media (SM)
	xD
	Compact Flash type I/II Version 4.0
	Smart Media (SM) Specification 2003
	Multi Media Card (MMC) Specification 4.2
Support Specification Versions:	Secure Digital (SD) 2.0
	Memory Stick Pro (MS-PRO) Specification 1.02
	Memory Stick (MS) Specification 1.43
	xD Specification 1.2
Power Source
Max Power Requirements	2.5W
Supply Voltage Range	4.75V ~ 5.25V
Power Consumption:	Standby less than 0.5mA @ 5.0VDC
Environmental Operating Conditions (Non-Condensing):
Operating Temperature Range	5°C to 50°C
Relative Humidity Range	10% to 90% RH
Environmental Non-Operating Conditions (Non-Condensing):
Operating Temperature Range	-40°C to 65°C
Relative Humidity Range	5% to 95% RH

41