Dell 760 manual PS/2 Serial Port Adapter

Page 113

11.Replace the computer cover (see Replacing the Computer Cover).

12.Uninstall the card's driver. See the documentation that came with the card for instructions.

13.If you removed a sound card:

a.Enter system setup, select System Configuration ® Miscellaneous Devices, and change the Audio setting to Enabled. (See Entering System Setup).

b.Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in connectors on the back panel of the computer.

14.If you removed a network adapter card and want to turn on the integrated network adapter:

a.Enter system setup, select System Configuration ® Integrated NIC, and change the setting to Enabled. (See Entering System Setup).

b.Connect the network cable to the integrated the back panel of the computer.

PS/2 Serial Port Adapter

Installing a PS/2 Serial Port Adapter

1.Follow the procedures in Working on Your Computer.

2.Remove the computer cover (see Removing the Computer Cover).

3.Gently lift the release tab on the card retention latch from the inside and pivot the latch open.

4.Remove the filler bracket (if applicable).

NOTE: See the documentation that came with the adapter for information on configuring the adapter, making internal connections, or customizing it for your computer.

5.Align the PS/2 serial-port adapter bracket in the retention slot and press down firmly. Ensure that the adapter is fully seated in the slot.

6.Before you close the card retention mechanism, ensure that:

The tops of all cards and filler brackets are flush with the alignment bar.

The notch in the top of the card or filler bracket fits around the alignment guide.

7.Secure the card(s) by closing the card retention latch and snapping it into place.

CAUTION: Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

1

release tab

2

adapter retention latch

3

serial port adapter bracket

4

serial port adapter

 

 

 

connector

5serial port adapter system board connector (PS2/SERIAL2)

Image 113
Contents Page LegacySelect Technology Control Advanced FeaturesManageability Active Management TechnologyAccessing iAMT setup IAMT FeaturesOut of Band Management Turning Off iAMTDell OpenManage Applications Alert Standard FormatDell Client Manager DCM Dell Client Manager DCM ConsolePhysical Security Option SettingsChassis Intrusion Detection Padlock Ring and Security Cable SlotSecurity Management Software Enabling the TPM FeatureTrusted Platform Module TPM Computer Tracking Software Power Management for Windows XP and Windows VistaAbout Smart Cards and Fingerprint Readers Hyperthreading and Multi-Core TechnologyPower Schemes Tab Power Options PropertiesAdvanced Tab Hibernate TabOptions in Windows Vista Sleep ModeConfiguring Power Management Settings Replacing the Battery BatteryBack to Contents Recommended Tools Working on Your ComputerBefore Working on Your Computer Turning Off Your ComputerAfter Working on Your Computer Desktop Computer About Your Computer Removing and Replacing PartsPCI Cards Installing a PCI CardCards Page Removing a PCI Card Removing a PCI Card From the Riser-Card Cage Page Installing a PCI Card in the Riser-Card Cage Page PS/2 Serial Port Adapter Installing a PS/2 Serial Port AdapterRemoving a PS/2 Serial Port Adapter Installing a PS/2 Serial Port Adapter in the Riser-Card Cage Removing a PS/2 Serial Port Adapter From the Riser-Card Cage Back to Contents Removing the Processor Installing the ProcessorProcessor Back to Contents Page Removing the Chassis Intrusion Switch Chassis Intrusion SwitchReplacing the Chassis Intrusion Switch Resetting the Chassis Intrusion DetectorSelect System Setup Connecting Drive Cables General Drive Installation GuidelinesData Interface Connectors Sata ConnectorConnecting and Disconnecting Drive Cables Power Cable ConnectorsDrive Inserts Removing Drive InsertsRemoving an Optical Drive Optical DriveReplacing Drive Inserts Installing an Optical Drive Removing a Floppy Drive Floppy DriveInstalling a Floppy Drive Removing a Media Card Reader Media Card ReaderInstalling a Media Card Reader Page Removing a Hard Drive Installing a Hard DriveHard Drive Page Back to Contents Removing the System Fan Installing the System FanSystem Fan Installing the Heat Sink Assembly Heat Sink AssemblyRemoving the Heat Sink Assembly Back to Contents Replacing the I/O Panel PanelRemoving the I/O Panel Page Replacing the Power Supply Power SupplyPin Number Signal name 18-AWG Wire DC Power ConnectorsDC Power Connector P1 DC Power Connector P4 DC Power Connector P2DC Power Connector P5 and P6 Pin Number Signal Name 22-AWG WireRemoving a Speaker Installing a SpeakerSpeakers Back to Contents Inside View of Your Computer DesktopRemoving the Computer Cover System Board Components Back to Contents Visit support.dell.com Contacting DellGlossary Docking device See APR Device driver See driverPage Page NIC See network adapter Module bay See media bayPage Video resolution See resolution Back to Contents DDR2 Memory Overview MemoryAddressing Memory Configurations Installing Memory Module sRemoving Memory Module s Mini Tower Computer Installing a PCI or PCI Express Card Page Removing a PCI or PCI Express Card PS/2 Serial Port Adapter Page Removing a PS/2 Serial Port Adapter Back to Contents Heat Sink and Processor Installing the Processor Back to Contents Chassis Intrusion Switch Back to Contents Drives Power cable Power input connector Installing a Hard Drive Page Adding a Second Hard Drive Floppy Drive Removing the Floppy Drive Installing the Floppy DriveRemoving the Media Card Reader Installing the Media Card Reader Optical Drive Installing an Optical Drive Back to Contents Panel Power Supply Pin Number Signal name AWG Wire DC Power Connector P7 DC Power Connectors P3, P5, P8, and P9Removing the Speaker Installing the SpeakerBack to Contents System Fan Page Inside Your Computer Mini Tower12VPOWER Back to Contents Ultra Small Form Factor Replacing the Computer CoverMini-Tower, Desktop, and Small Form Factor Release knob Cards Page Removing a PCI Card PCI Express and DVI Cards Installing a PCI Express x16 Card or DVI CardRemoving a PCI Express x16 Card or DVI Card Page PS/2 Serial Port Adapter Removing a PS/2 Serial Port Adapter Heat Sink and Processor Installing the Processor Page Back to Contents Chassis Intrusion Switch Select System Setup Serial ATA Sata Connector General Installation GuidelinesHard Drive Installing a Hard Drive Page Replacing a Hard Drive Fan Optical Drive Installing an Optical Drive Floppy Drive Installing a Floppy Drive Media Card Reader Installing a Media Card Reader Back to Contents System Fan Panel Back to Contents Power Supply DC Power Connectors DC Power Connector P6 DC Power Connectors P3Speakers Replace the computer cover Turn on power to the computer Small Form Factor Intspkr Fan connector Fancpu Small Form Factor Computer Mini Tower System Board Screws System BoardRemoving the System Board Small Form Factor System Board Screws Desktop System Board ScrewsUltra Small Form Factor System Board Screws Replacing the System BoardBack to Contents Entering System Setup System SetupSystem Setup Options System Setup ScreenInternal default Read Only DisableDisable Enable with PXE Enable with ImageSever Disable No bootOnboard/PEG Deactivate defaultQuiet SuggestedPower On Power Off defaultOn is set to disabled EnableChanging the Boot Sequence for the Current Boot Boot SequenceEnable F12 = Boot menu enabled by default Clear Log Mark all EntriesPassword Protection Booting to a USB DeviceChanging the Boot Sequence for Future Boots System PasswordAssigning a System Password Administrator PasswordTyping Your System Password Deleting or Changing an Existing System PasswordDisabling a Forgotten Password and Setting a New Password Jumper SettingsAssigning an Administrator Password Deleting or Changing an Existing Administrator PasswordMini Tower Desktop Small Form Factor Ultra Small Form Factor Jumper Setting Description Clearing Forgotten PasswordsChange the Lookup Method to Static IP Clearing Cmos SettingsSet Client Dhcp to Static IP Back to Contents Power Lights TroubleshootingDiagnostic Lights ToolsLight Pattern Problem Description Suggested Resolution Diagnostic Light Codes During PostBlinking Amber Steady AmberSteady Green Blinking Green Power Supply Diagnostic LightSteady Code Cause Beep CodesSystem Messages When to Use the Dell Diagnostics Dell DiagnosticsFix a Problem section, click Hardware Troubleshooter Hardware TroubleshooterStarting the Dell Diagnostics From Your Hard Drive Option Function Dell Diagnostics Main MenuBattery Problems Solving ProblemsDrive Problems Tab FunctionProblems writing to an optical drive Optical drive problemsHard drive problems Click Properties Tools Check NowIeee 1394 Device Problems Error MessagesClick Uninstall Click Start Control Panel Programs Programs and FeaturesLockups and Software Problems Keyboard ProblemsComputer does not start up Computer stops respondingOther software problems Memory ProblemsProgram crashes repeatedly Program is designed for an earlier Windows operating systemNetwork Problems Mouse ProblemsClick Start Control Panel Mouse Click Start Control Panel Hardware and Sound MousePrinter Problems Power ProblemsSound and Speaker Problems Scanner ProblemsNo sound from speakers Click Start Control Panel Hardware and Sound PrinterScreen is blank Screen is difficult to read Video and Monitor ProblemsNo sound from headphones 3D image quality is poor Dell Technical Update ServiceOnly part of the display is readable Click Start Control Panel Appearance and ThemesRemove the cover see Removing the Computer Cover Module BayPage Securing a Device in the Module Bay Back to Contents Removing the Cable Cover Cable Cover OptionalAttaching the Cable Cover Heat Sink and Processor Installing the Processor Page Back to Contents Chassis Intrusion Switch Select System Setup Drives Removing the Hard Drive Page Replacing the Hard-Drive Fan Removing the Hard-Drive FanBack to Contents Removing the System Fans Installing the System FansSystem Fans Back to Contents Replacing the Power Button Power ButtonRemoving the Power Button Speakers Replace the computer cover Turn on power to the computer Ultra Small Form Factor System Board Components Dell Badge Ultra Small Form Factor Computer
Related manuals
Manual 37 pages 5.72 Kb

760 specifications

The Dell OptiPlex 760 is a highly regarded desktop computer that caters primarily to business environments. Released as part of Dell’s OptiPlex series, the 760 is designed for efficiency, reliability, and performance, making it a suitable choice for organizations looking for a dependable workstation.

One of the standout features of the Dell 760 is its versatility in form factor. It is available in mini-tower, desktop, and ultra-small form factor configurations, offering options that can fit various workspace requirements. This adaptability ensures that businesses can tailor their desktop setup based on space constraints or specific usage scenarios.

Powering the Dell 760 is an Intel Core 2 Duo processor, which provides a competent level of performance for typical office applications, multitasking, and data processing tasks. The system supports a wide range of processors, with options available for both dual-core and quad-core configurations, delivering the necessary horsepower for demanding applications.

In terms of memory, the OptiPlex 760 supports up to 8GB of DDR2 RAM, allowing for adequate multitasking capabilities. The inclusion of ample RAM helps improve the overall responsiveness of the system, making it perfect for business applications that require quick access to data and smooth operation.

Storage options on the Dell 760 include various hard drive capacities, ranging from 160GB to 500GB SATA HDDs. Additionally, the system can accommodate SSD upgrades for those seeking faster boot times and enhanced data access speeds, further improving efficiency in work environments.

Connectivity is another area where the Dell 760 excels. The desktop features a range of ports, including USB 2.0, VGA, and optional DisplayPort outputs, enabling users to connect multiple peripherals and displays easily. Integrated Ethernet allows for seamless network connections, which is crucial for businesses that rely on online connectivity and network sharing.

Another important characteristic of the Dell 760 is its energy efficiency. The system is designed to meet ENERGY STAR certification, making it a responsible choice for businesses looking to reduce their environmental impact and operating costs. This focus on sustainability aligns with modern corporate values, making the Dell 760 a forward-thinking solution.

In summary, the Dell OptiPlex 760 stands out as a reliable and efficient desktop solution for business use. With its range of form factors, powerful Intel processors, ample memory and storage options, extensive connectivity, and energy-efficient design, it remains a solid choice for organizations aiming to enhance their productivity while maintaining cost-effectiveness.