Dell 760 manual Onboard/PEG, Quiet, Suggested, Performance, Deactivate default, Activate, Clear

Page 151

Video

Primary Video

Specifies which video controller is primary when two video controllers are present on the computer.

•Auto (default)

•Onboard/PEG

Performance

Multi Core Support

Specifies whether one or all the cores of the processor will be enabled.

 

NOTE: The performance of some applications improve with additional cores.

 

 

Intel® SpeedStep™

Enables or disables the Intel SpeedStep mode.

 

This option is disabled by default.

 

 

Limit CPUID Value

Enables or disables the CPUID limit.

 

This option is disabled by default.

HDD Acoustic Mode

Sets the performance speed and noise level of your hard drive to:

 

•

Bypass (default)

 

•

Quiet

 

•

Suggested

 

•

Performance

 

 

 

Virtulization Support

VT for Direct

I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel Virtulization technology for direct I/O.

Security

Administrative

Provides restricted access to the computer's system setup program in the same way that access to the system can be restricted

Password

with the System Password option.

 

This option is not set by default.

 

 

System Password

Displays the current status of the system's password security feature and allows a new system password to be assigned and

 

verified.

 

This option is not set by default.

 

 

Password Changes

Enables or disables the user from changing the system password without the administrative password.

 

This option is enabled by default.

 

 

TPM Security

Enables or disables the trusted platform module (TPM) security.

 

You can set the TPM security to:

 

•

Deactivate (default)

 

•

Activate

 

•

Clear

 

NOTE: When TPM Security is set to Clear the system setup program clears the user information stored in the TPM.

CPU XD Support

Enables or disables the execute disable mode of the processor.

 

This option is enabled by default.

 

 

Computrace(R)

Enables or disables the optional Computrace® service designed for asset management.

 

You can set this option to:

 

•

Deactivate (default)

 

•

Disable

 

•

Activate

SATA-0 Password

Displays the current status of the password set for the hard drive connected to the SATA-0 connector on the system board.

You can also set a new password. This option is not set by default.

NOTE: The system setup program displays a password for each of the hard drives connected to your system board.

Power Management

Page 150 Page 152
Image 151
Page 150 Page 152
Contents Page Active Management Technology Advanced FeaturesLegacySelect Technology Control ManageabilityTurning Off iAMT IAMT FeaturesAccessing iAMT setup Out of Band ManagementDell Client Manager DCM Console Alert Standard FormatDell OpenManage Applications Dell Client Manager DCMPadlock Ring and Security Cable Slot Option SettingsPhysical Security Chassis Intrusion DetectionTrusted Platform Module TPM Enabling the TPM FeatureSecurity Management Software Hyperthreading and Multi-Core Technology Power Management for Windows XP and Windows VistaComputer Tracking Software About Smart Cards and Fingerprint ReadersHibernate Tab Power Options PropertiesPower Schemes Tab Advanced TabConfiguring Power Management Settings Sleep ModeOptions in Windows Vista Replacing the Battery BatteryBack to Contents Turning Off Your Computer Working on Your ComputerRecommended Tools Before Working on Your ComputerAfter Working on Your Computer Desktop Computer About Your Computer Removing and Replacing PartsCards Installing a PCI CardPCI Cards Page Removing a PCI Card Removing a PCI Card From the Riser-Card Cage Page Installing a PCI Card in the Riser-Card Cage Page PS/2 Serial Port Adapter Installing a PS/2 Serial Port AdapterRemoving a PS/2 Serial Port Adapter Installing a PS/2 Serial Port Adapter in the Riser-Card Cage Removing a PS/2 Serial Port Adapter From the Riser-Card Cage Back to Contents Processor Installing the ProcessorRemoving the Processor Back to Contents Page Resetting the Chassis Intrusion Detector Chassis Intrusion SwitchRemoving the Chassis Intrusion Switch Replacing the Chassis Intrusion SwitchSelect System Setup Sata Connector General Drive Installation GuidelinesConnecting Drive Cables Data Interface ConnectorsRemoving Drive Inserts Power Cable ConnectorsConnecting and Disconnecting Drive Cables Drive InsertsReplacing Drive Inserts Optical DriveRemoving an Optical Drive Installing an Optical Drive Removing a Floppy Drive Floppy DriveInstalling a Floppy Drive Removing a Media Card Reader Media Card ReaderInstalling a Media Card Reader Page Hard Drive Installing a Hard DriveRemoving a Hard Drive Page Back to Contents System Fan Installing the System FanRemoving the System Fan Removing the Heat Sink Assembly Heat Sink AssemblyInstalling the Heat Sink Assembly Back to Contents Removing the I/O Panel PanelReplacing the I/O Panel Page Replacing the Power Supply Power SupplyDC Power Connector P1 DC Power ConnectorsPin Number Signal name 18-AWG Wire Pin Number Signal Name 22-AWG Wire DC Power Connector P2DC Power Connector P4 DC Power Connector P5 and P6Speakers Installing a SpeakerRemoving a Speaker Back to Contents Removing the Computer Cover DesktopInside View of Your Computer System Board Components Back to Contents Visit support.dell.com Contacting DellGlossary Docking device See APR Device driver See driverPage Page NIC See network adapter Module bay See media bayPage Video resolution See resolution Back to Contents DDR2 Memory Overview MemoryAddressing Memory Configurations Installing Memory Module sRemoving Memory Module s Mini Tower Computer Installing a PCI or PCI Express Card Page Removing a PCI or PCI Express Card PS/2 Serial Port Adapter Page Removing a PS/2 Serial Port Adapter Back to Contents Heat Sink and Processor Installing the Processor Back to Contents Chassis Intrusion Switch Back to Contents Drives Power cable Power input connector Installing a Hard Drive Page Adding a Second Hard Drive Floppy Drive Removing the Floppy Drive Installing the Floppy DriveRemoving the Media Card Reader Installing the Media Card Reader Optical Drive Installing an Optical Drive Back to Contents Panel Power Supply Pin Number Signal name AWG Wire DC Power Connector P7 DC Power Connectors P3, P5, P8, and P9Removing the Speaker Installing the SpeakerBack to Contents System Fan Page Inside Your Computer Mini Tower12VPOWER Back to Contents Mini-Tower, Desktop, and Small Form Factor Replacing the Computer CoverUltra Small Form Factor Release knob Cards Page Removing a PCI Card PCI Express and DVI Cards Installing a PCI Express x16 Card or DVI CardRemoving a PCI Express x16 Card or DVI Card Page PS/2 Serial Port Adapter Removing a PS/2 Serial Port Adapter Heat Sink and Processor Installing the Processor Page Back to Contents Chassis Intrusion Switch Select System Setup Serial ATA Sata Connector General Installation GuidelinesHard Drive Installing a Hard Drive Page Replacing a Hard Drive Fan Optical Drive Installing an Optical Drive Floppy Drive Installing a Floppy Drive Media Card Reader Installing a Media Card Reader Back to Contents System Fan Panel Back to Contents Power Supply DC Power Connectors DC Power Connector P6 DC Power Connectors P3Speakers Replace the computer cover Turn on power to the computer Small Form Factor Intspkr Fan connector Fancpu Small Form Factor Computer Removing the System Board System BoardMini Tower System Board Screws Small Form Factor System Board Screws Desktop System Board ScrewsUltra Small Form Factor System Board Screws Replacing the System BoardBack to Contents System Setup Screen System SetupEntering System Setup System Setup OptionsDisable No boot DisableInternal default Read Only Disable Enable with PXE Enable with ImageSeverSuggested Deactivate defaultOnboard/PEG QuietEnable Power Off defaultPower On On is set to disabledClear Log Mark all Entries Boot SequenceChanging the Boot Sequence for the Current Boot Enable F12 = Boot menu enabled by defaultSystem Password Booting to a USB DevicePassword Protection Changing the Boot Sequence for Future BootsDeleting or Changing an Existing System Password Administrator PasswordAssigning a System Password Typing Your System PasswordDeleting or Changing an Existing Administrator Password Jumper SettingsDisabling a Forgotten Password and Setting a New Password Assigning an Administrator PasswordMini Tower Desktop Small Form Factor Ultra Small Form Factor Jumper Setting Description Clearing Forgotten PasswordsSet Client Dhcp to Static IP Clearing Cmos SettingsChange the Lookup Method to Static IP Back to Contents Tools TroubleshootingPower Lights Diagnostic LightsSteady Amber Diagnostic Light Codes During PostLight Pattern Problem Description Suggested Resolution Blinking AmberSteady Green Steady Power Supply Diagnostic LightBlinking Green System Messages Beep CodesCode Cause Hardware Troubleshooter Dell DiagnosticsWhen to Use the Dell Diagnostics Fix a Problem section, click Hardware TroubleshooterStarting the Dell Diagnostics From Your Hard Drive Option Function Dell Diagnostics Main MenuTab Function Solving ProblemsBattery Problems Drive ProblemsClick Properties Tools Check Now Optical drive problemsProblems writing to an optical drive Hard drive problemsClick Start Control Panel Programs Programs and Features Error MessagesIeee 1394 Device Problems Click UninstallComputer stops responding Keyboard ProblemsLockups and Software Problems Computer does not start upProgram is designed for an earlier Windows operating system Memory ProblemsOther software problems Program crashes repeatedlyClick Start Control Panel Hardware and Sound Mouse Mouse ProblemsNetwork Problems Click Start Control Panel MousePrinter Problems Power ProblemsClick Start Control Panel Hardware and Sound Printer Scanner ProblemsSound and Speaker Problems No sound from speakersNo sound from headphones Video and Monitor ProblemsScreen is blank Screen is difficult to read Click Start Control Panel Appearance and Themes Dell Technical Update Service3D image quality is poor Only part of the display is readableRemove the cover see Removing the Computer Cover Module BayPage Securing a Device in the Module Bay Back to Contents Attaching the Cable Cover Cable Cover OptionalRemoving the Cable Cover Heat Sink and Processor Installing the Processor Page Back to Contents Chassis Intrusion Switch Select System Setup Drives Removing the Hard Drive Page Replacing the Hard-Drive Fan Removing the Hard-Drive FanBack to Contents System Fans Installing the System FansRemoving the System Fans Back to Contents Removing the Power Button Power ButtonReplacing the Power Button Speakers Replace the computer cover Turn on power to the computer Ultra Small Form Factor System Board Components Dell Badge Ultra Small Form Factor Computer
Related manuals
Manual 37 pages 5.72 Kb

760 specifications

The Dell OptiPlex 760 is a highly regarded desktop computer that caters primarily to business environments. Released as part of Dell’s OptiPlex series, the 760 is designed for efficiency, reliability, and performance, making it a suitable choice for organizations looking for a dependable workstation.

One of the standout features of the Dell 760 is its versatility in form factor. It is available in mini-tower, desktop, and ultra-small form factor configurations, offering options that can fit various workspace requirements. This adaptability ensures that businesses can tailor their desktop setup based on space constraints or specific usage scenarios.

Powering the Dell 760 is an Intel Core 2 Duo processor, which provides a competent level of performance for typical office applications, multitasking, and data processing tasks. The system supports a wide range of processors, with options available for both dual-core and quad-core configurations, delivering the necessary horsepower for demanding applications.

In terms of memory, the OptiPlex 760 supports up to 8GB of DDR2 RAM, allowing for adequate multitasking capabilities. The inclusion of ample RAM helps improve the overall responsiveness of the system, making it perfect for business applications that require quick access to data and smooth operation.

Storage options on the Dell 760 include various hard drive capacities, ranging from 160GB to 500GB SATA HDDs. Additionally, the system can accommodate SSD upgrades for those seeking faster boot times and enhanced data access speeds, further improving efficiency in work environments.

Connectivity is another area where the Dell 760 excels. The desktop features a range of ports, including USB 2.0, VGA, and optional DisplayPort outputs, enabling users to connect multiple peripherals and displays easily. Integrated Ethernet allows for seamless network connections, which is crucial for businesses that rely on online connectivity and network sharing.

Another important characteristic of the Dell 760 is its energy efficiency. The system is designed to meet ENERGY STAR certification, making it a responsible choice for businesses looking to reduce their environmental impact and operating costs. This focus on sustainability aligns with modern corporate values, making the Dell 760 a forward-thinking solution.

In summary, the Dell OptiPlex 760 stands out as a reliable and efficient desktop solution for business use. With its range of form factors, powerful Intel processors, ample memory and storage options, extensive connectivity, and energy-efficient design, it remains a solid choice for organizations aiming to enhance their productivity while maintaining cost-effectiveness.
Top Page Image Contents