Graco 239096, 239126, 239088 Mounting Automatic and Manual Models, Connecting Automatic Models

Page 6

Installation

The installations in Fig. 2 are guides for selecting and installing system components. Contact your Graco distributor for assistance in planning a system to suit your needs.

Mounting Automatic and Manual Models

Be sure the mounting surface can support the weight of the pump, surge suppressor, hoses, and accessories, and the stress caused during operation.

DMount the surge suppressor as close to the pump discharge as possible and upstream of equipment such as valves, meters, filters, and so on. The surge suppressor should be installed within 10 pipe diameters of the pump discharge.

DIf you use a flexible connector from the pump to the piping system, the surge suppressor should be mounted to the pump discharge manifold, and the flexible connector should be attached to the surge suppressor tee and system piping.

DBecause pressure is equal in all directions, the surge suppressor can be installed in any position, but the vertical position shown in Fig. 2 is recommended for better draining. Fluids with high specific gravity or high viscosity, settling of heavy material, and possible air entrapment further limit the mounting positions other than those shown in Fig. 2.

NOTE: When you mount a plastic surge suppressor, do not overtighten by using a large pipe wrench near the threads of the fluid inlet. The housing may crack if tightened too much. Hand tightening is recommended.

Connecting Automatic Models

DConnect the 1/4-in air supply hose to the 1/4 npt connection on the top of the surge suppressor.

DThe air pressure to the surge suppressor must be greater than or equal to the pump discharge and/or system pressure. For equal air pressure, you can use a tee in the pump’s air supply line to run an air line to the surge suppressor.

DFor models with elastomer bladders, the tee must be located in the pump’s air supply line before any pump controller or instrumentation such as the filter, regulator, or pump control valve.

DFor models with PTFE bellows, the tee must be located in the pump’s air supply line after any pump controller or instrumentation such as the filter, regulator, or pump control valve.

Connecting Manual Models

DConnect the 1/4-in air supply hose to the brass one-way check valve on the top of the surge sup- pressor.

DThe air pressure to the surge suppressor must be greater than or equal to the pump discharge and/or system pressure. For equal air pressure, you can use a tee in the pump’s air supply line to run an air line to the surge suppressor.

DThe tee must be located in the pump’s air supply line before any pump controller or instrumentation such as the filter, regulator, or pump control valve.

6308703

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instructions-Parts List Important Safety InstructionsModel 239088 Model Model 239096 Model Table of Contents SymbolsToxic Fluid Hazard Installation GroundingGrounding a Surge Suppressor Connecting Automatic Models Connecting Manual ModelsMounting Automatic and Manual Models Operation Pressure Relief ProcedureMinimum and Maximum Operating Temperatures Use oxygenCharging and Startup Automatic Models Manual ModelsTroubleshooting See Charging and StartupSee Bladder Failure, Replacing Bladder or Bellows ServiceBladder Failure Relieve the pressureTorque Table Model Numbers Automatic Husky 750, 3/4-in Surge SuppressorsParts Matrix No. Part No DescriptionParts Drawings Model24, 25, 27 Dimensions Manual Husky Automatic HuskyTechnical Data Weight Models 239091, 239096Graco Standard Warranty Graco Information

239126, 239088, 239095, 239091, 239096 specifications

Graco offers a range of innovative paint sprayers designed to enhance the efficiency and quality of painting projects. Among its notable products are the Graco 239096, 239091, 239095, 239088, and 239126 models. Each of these sprayers comes equipped with unique features and advanced technologies, catering to both professional contractors and DIY enthusiasts.

The Graco 239096 is recognized for its compact design and portability, making it ideal for smaller job sites or projects requiring mobility. It features a powerful motor that facilitates consistent paint flow, allowing for a smooth and even application. The unit is also versatile, capable of spraying various materials, including stains and latex paints, showcasing its adaptability across different applications.

The Graco 239091 stands out with its high-efficiency airless technology, which ensures less overspray and reduced paint waste. This model is engineered to deliver a finely atomized spray pattern, resulting in professional-grade finishes. With its easy-to-use controls, operators can effortlessly adjust the pressure settings to match the specific requirements of each task, enhancing precision and control during painting.

Moving on to the Graco 239095, this sprayer is designed for high-volume projects, featuring a robust motor designed for demanding applications. Its durable construction ensures longevity while the built-in filter system helps keep the spray nozzle clean, reducing the downtime typically associated with maintenance. Its large capacity paint container allows for extended operation without frequent refills, making it an excellent choice for large-scale jobs.

The Graco 239088 model is particularly user-friendly, with an intuitive interface that simplifies operation even for first-time users. It includes a lightweight design for easy handling and transport, coupled with a comfortable grip that minimizes fatigue. This sprayer is perfect for fine-detail work and touch-ups, thanks to its adjustable spray width and pressure, which can be easily modified based on the project needs.

Lastly, the Graco 239126 is equipped with advanced technology that minimizes overspray while maximizing efficiency. This model features a reversible tip system that allows users to quickly clear clogs, ensuring a seamless painting experience. Its ergonomic design and built-in features make it suitable for both detailed work and larger applications, offering versatility that adapts to the user's needs.

In summary, the Graco paint sprayer lineup, including the 239096, 239091, 239095, 239088, and 239126, presents a variety of options tailored to enhance productivity and quality in painting applications. With their cutting-edge technology, user-friendly designs, and robust features, these models are ideal for anyone looking to achieve a professional finish.
Top Page Image Contents