Fujitsu S2210 manual Drive1 Submenu of the Main Menu, Type Auto None, Multi-Sector Disabled

Page 7

M a i n M e n u

Drive1 Submenu of the Main Menu

The Drive1 submenu allows you to configure secondary ATA devices.

Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed.

PhoenixBIOS Setup Utility

Main


	Primary Master [None]		Item Specific Help

	Type:	[Auto]	Select Serial ATA/IDE
			drive installed here.
	Multi-Sector Transfers:	[Disabled]
	LBA Mode Control:	[Disabled]	[Auto]
	Transfer Mode:	[Standard]	The BIOS auto-types the
	Ultra DMA Mode:	[Disabled]	drive on boot time.
			[None]
			The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

		Figure 3. Drive1 Submenu
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu

Menu Field	Options	Default	Description


Type:	• Auto	[Auto]	NOTE: The Type field does not appear as a drop-down menu. Tap the
	• None		spacebar to toggle the selections.
	• None
			Selects the ATA/ATAPI device type. Select Auto to have the type automati-
			cally identified by the BIOS at POST. If None is selected, all of the following
			setup items do not appear.

Multi-Sector	• Disabled	[Disabled]	The best option is selected by the BIOS automatically when Auto is
Transfers:	• 2 Sectors		selected and cannot be selected by the user. Specifies the number of
	• 4 Sectors		sectors per block for multiple sector transfer.
	• 8 Sectors
	• 16 Sectors

LBA Mode	• Disabled	[Disabled]	The best option is selected by the BIOS automatically when Auto is
Control:	• Enabled		selected and cannot be selected by the user. Enables or disables Logical
			Block Addressing in place of Cylinder, Head, Sector addressing.

7

Image 7

Contents Fujitsu LifeBook Series Navigating through the Setup Utility Bios Setup UtilityEntering the Bios Setup Utility Using the TrustedCore MenuI n M e n u Sets and displays the current time. Time is in a 24 hour for Main Menu Setting Standard System ParametersEnglish US Sets and displays the current date. Date is in a month/dayDisplay the type of device on this ATA/IDE interface. Press There is one. Pressing the Enter key selects the Drive1 subAuto Drive0 Submenu of the Main MenuNone Type Auto None Multi-Sector DisabledControl Enabled Drive1 Submenu of the Main MenuExiting from Main Menu Fields, Options and Defaults for the Advanced Menu Advanced Menu Setting Device Feature ControlsVirtualizationTM features FIR FIR Keyboard/Mouse Features Submenu of the Advanced Menu Application whose resolution causes it to appear smaller Video Features Submenu of the Advanced MenuSelects where the video signal will be routed. Note that Enables or disables display compensation. Display comSecurity Power Savings Exit Internal Device Configurations Submenu of the Advanced MenuCPU Features Submenu CPU Features Submenu of the Advanced MenuUSB Features Submenu USB Features Submenu of the Advanced MenuMiscellaneous Configurations Submenu of the Advanced Menu Enter Event Logging Submenu of the Advanced MenuYes Info Exit Security Menu Setting the Security FeaturesFirst Boot Set, and Clear when it is notSet User Password Enter Must be used to access the Bios setup utilityBeen set Hard Disk Security Submenu of the Security MenuBlack Red Gray Light Red Owner Information Submenu of the Security MenuExiting from the Security Menu Security Chip Setting Submenu of the Security MenuFields, Options and Defaults for the Boot Menu Boot Menu Selecting the Operating System SourceMain Advanced Security Boot Device Priority Submenu of the Boot MenuDrive0 Exiting from Boot MenuInfo Menu Displays Basic System Information Fields, Options and Defaults for the Info MenuExit Saving Exit Menu Leaving the Setup UtilityDefaults Setup Utility SectionSave Changes Power OffDiscard Changes