All dividers are loaded into the cart prior to shipment.
To remove dividers: First, pull upwards on the front of the divider to unsnap the front foot from the shelf, and then pull the divider up and out towards yourself, guiding the top edge through the slots above.
To reinstall dividers: Slide the divider into the cart, guiding the top edge through the slots above. Hook the lower rear divider foot into the back slot in the shelf. The push the front edge downwards to snap the front foot in place.
These slots are intended for cord management.
CHARGING LAPTOPS |
| |
1. | Make sure timer switch (outer left side of cart) is in the OFF position. |
|
2. | Slide laptops into storage compartments. |
|
3. | Plug brick into AC outlet above each laptop. |
|
4. | Plug timer power cord into wall outlet. |
|
5. | Turn switch to the ON position. |
|
CAUTION: Only listed laptops may be used in the laptop cart. | 2 | |