Surge Protected COAX/RF Connectors, Circuit Breaker

Surge Protected COAX/RF Connectors

The C5 provides surge protection for your CATV system, Cable Modem, DSS, or Antenna system. The surge protection feature prevents surges traveling over Coaxial data lines from damaging the system.

Connect the coaxial cable from the CATV or Cable Modem provider to the connector marked “IN.”

Connect other cable from the connector marked “OUT” to the device being protected (CATV box or Cable Modem).

Circuit Breaker

The C5 also provides a “press-to-reset” circuit breaker. When this breaker is “tripped” due to an electrical surge or overload, the device pops out and shuts down output power to the out- lets. To reset the circuit breaker, push it straight inward.

CAUTION: When resetting the Circuit Breaker, push the button in quickly, and release the button. Do not hold the but- ton inward. Failure to comply may result in equipment dam- age.

3Surge Protected Telephone Jacks

The C5 provides a telephone line splitter with surge protec- tion to protect components connected via telephone line. Connect the supplied RJ11 Telephone cable from the wall jack (source) to the telephone line connector marked “IN”. Connect other telephone cables to the connector marked “OUT” and then to the equipment to be protected (Telephone, DVR, DSS, or DSL).

4Additional Surge Protected COAX/RF Connectors

The C5 also provides a surge protection for your DSS system or RF Antenna system. The surge protection feature prevents surges traveling over Coaxial cable from damaging the equip- ment.

Connect the coaxial cable from the DSS or Antenna system to the connector marked “IN.”

Connect another coaxial cable from the connector marked “OUT” to the device being protected (DSS or Antenna).

- 9 -