Introduction, Testing | APC PMP1XR-B manual

Introduction

Thank you for choosing the APC SurgeArrest® PMP1XR-B Surge Protective Device (SPD).

The APC Surge Protective Device (SPD) is a high-quality, high-energy surge attenuation system that has been designed to protect sensitive equipment from damaging transient voltage surges. Proper installation is imperative to maximize the surge suppressor’s effectiveness and performance.

This manual is to be used as a guide for installing the device. Read and understand all information contained in this manual prior to installation. The outlined procedures are not intended to supersede local or national electrical codes. Check all applicable electrical codes to assure compliance.

This device must be installed by qualified electrical personnel. The installer should follow the steps detailed in this manual to ensure proper installation. A copy of the installer’s invoice, detailing the installation of this device, is required in order to take advantage of the unit’s product warranty.

The SurgeArrest® PMP1XR-B product lines specify a parallel SPD designed for service entrance and downstream panelboard applications. These units provide a maximum surge protection rating of 50 kA per phase rating.

All APC products are extensively tested according to industry standards as set by IEEE C62.41 and C62.45 for Categories A, B, and C. The connection method for these devices may require several feet of wire. Be aware that increased lead length adversely affects clamping voltages.

Save this manual! It includes instructions regarding the product warranty and replacement parts.

Testing

Any factory or on-site testing that exceeds the normal operating voltage, such as high-potential insulation testing or other tests where the suppression components will be subjected to voltages higher than their rated “turn on” voltage, must be run with the suppressor disconnected from the power source. For four-wire devices, the neutral connection at the SPD must also be disconnected prior to performing high-potential testing and then reconnected upon completion of the test.

Failure to disconnect this surge suppression device and its associated suppression components during elevated voltage testing will result in damage to the suppression components and/or other electronic components.

Installation and Operation Manual

PMP1XR-B specifications

The APC PMP1XR-B is a contemporary powerhouse in the realm of power management solutions, designed with versatility and high efficiency in mind. This model stands out due to its state-of-the-art features, making it ideal for both personal and professional use.

At its core, the APC PMP1XR-B boasts a robust architecture that offers a premium level of performance and reliability. One of its main features includes advanced surge protection capabilities that guard connected devices against power fluctuations and spikes, thereby extending their operational lifespan. This is particularly critical in environments where sensitive electronics are in use, ensuring they maintain peak performance without the threat of damage from unexpected electrical disturbances.

The unit's compact design makes it remarkably user-friendly, allowing for easy integration into various setups. With multiple output ports, the PMP1XR-B can power a range of devices simultaneously, making it exceptionally useful in home theaters, offices, and gaming setups. The inclusivity of USB ports also enhances its functionality, providing an additional charging option for mobile devices and gadgets.

One of the standout technologies integrated into the APC PMP1XR-B is a built-in intelligent cooling system. This feature optimizes airflow and temperature management, ensuring that the device operates efficiently without overheating. This is essential for maintaining not only the unit's longevity but also for ensuring that it delivers consistent power supply without interruptions.

Furthermore, the APC PMP1XR-B includes user-friendly programmable settings that allow for customized power management. Users can set schedules and manage power usage, ensuring energy is conserved when devices are not in use. This capability not only contributes to lower electricity bills but also supports eco-friendly practices.

The build quality of the APC PMP1XR-B reflects APC's commitment to manufacturing durable products that can withstand the rigors of daily usage. Its enclosure is designed with high-quality materials that provide both aesthetic appeal and practical durability.

In summary, the APC PMP1XR-B offers a blend of robust features, advanced technologies, and reliable performance. With its surge protection, multiple connectivity options, intelligent cooling, and user-centric programmable settings, it is an invaluable asset for anyone looking to enhance their power management capabilities. Whether used in a home or a professional environment, it ensures that your devices remain protected and functional, paving the way for a more efficient energy management experience.