Installation Steps

1.Disconnect the cable from the equipment’s serial port.

2.Connect the surge protector to the equipment’s serial port.

3.Connect the ground wire to the equipment chassis.

4.Reconnect the communications cable to the surge protector.

© Copyright 2010. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond™ is a trademark of BB Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.

SP361A-R2, rev.1

FREE, live, 24/7 Tech Support is just 30 seconds away.

724-746-5500 blackbox.com