Operating Instructions, DMX Mode, Menu Map

4.OPERATING INSTRUCTIONS

Configuring the Starting Address

The DMX-4 LED fixture uses up to four DMX channels. The highest channel that the fixture may be set to in order to function properly is 509. Any address higher than this will prevent access to all of the channels.

If this is your first time using DMX, we recommend reading the “DMX Primer” section in the “Appendix”.

DMX Mode

This is the operating mode which will allow for control with an external DMX controller. You must set the starting address and personality for this mode.

Please see the instructions below.

1.Press <MODE> to switch between “DMX Mode” and “Standalone Mode”. Switch it to “DMX Mode”.

2.Press <MENU> until the LED display reads ~.

3.Using <UP> and <DOWN>, select one of the three personalities.

4.Press <MENU> until the LED display reads ~.

5.Using <UP> and <DOWN>, select the DMX starting address.

Standalone Mode

This fixture has built-in auto programs with adjustable settings.

Please see the instructions below.

1.Press <MODE> to switch between “DMX Mode” and “Standalone Mode”. Switch it to “Standalone Mode”.

2.Press <MENU> until the LED display reads ~.

3.Using <UP> and <DOWN>, select one of the programs.

4.Press <MENU> until the LED display reads ~.

5.Using <UP> and <DOWN>, select the desired run speed.

6.Press <MENU> until the LED display reads ~.

7.Using <UP> and <DOWN>, select the desired dimmer level for the program currently running.

Menu Map

MODE	MENU	DISPLAY	DESCRIPTION
	Starting address	~
			1-channel mode
	Personality		2-channel mode
DMX Mode			4-channel mode
DMX Mode	Switch/Dimmer		Channel 1 function
	Switch/Dimmer		Channel 1 function
			Channel 2 function
	Switch: 		Channel 3 function
	Dimmer: 		Channel 4 function
	Program	~
Standalone Mode	Run speed	~
	Dimmer	~	Slow~fast

4. Operating Instructions

12/10/2010 5:16 PM