Limited Warranty, Service | ETA Systems ETA-PD8 specification

ETA-PD8

Power Conditioner & Distribution Unit

LIMITED WARRANTY

All products manufactured by ETA Systems are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty shall extend from the date of purchase for a period of one year. Additionally, fuses and lamps carry no warranty. ETA Systems will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed in other than a workmanlike manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to ETA Systems do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs before any non-warranty work is performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges collect.

EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ETA SYSTEMS SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

ETA Systems does not assume, nor does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

SERVICE

Should your ETA-PD8 require service, please contact the

ETA Systems warranty department at

1-877-689-8055, ext. 277 to obtain an RA number.

ETA Systems Tech Support can be reached at 1-800-321-6699.

Visit our web site at www.ETAsys.com to see other ETA Systems products.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 12 –

ETAsys.com

Specifications are subject to change without notice.

ETA-PD8 specifications

The ETA Systems ETA-PD8 is an advanced power distribution unit designed to cater to the needs of various applications in telecommunications, data centers, and network systems. Known for its robust performance and versatile capabilities, the ETA-PD8 stands out as a pivotal component for managing power efficiently.

One of the primary features of the ETA-PD8 is its intelligent power monitoring system. This system provides real-time data on power usage and load distribution, allowing for effective management and optimization of power resources. Users can access detailed statistics through an intuitive interface, enabling them to make informed decisions about power allocation and consumption.

The ETA-PD8 is designed with modularity in mind, featuring a flexible architecture that allows for scaling according to the demands of the environment. Its hot-swappable components facilitate uninterrupted operations, even during maintenance or upgrades. This characteristic is especially beneficial for critical infrastructures that require constant uptime.

Another significant aspect of the ETA-PD8 is its integration of advanced safety features. Overcurrent protection, surge protection, and thermal management solutions are built into the system to safeguard against electrical faults. This enhances the longevity of connected devices and ensures the reliability of operations in demanding settings.

In terms of connectivity, the ETA-PD8 supports various communication protocols, including SNMP and HTTP, enabling seamless integration with existing network management systems. This connectivity allows for remote monitoring and management, which is crucial for system administrators overseeing large installations.

The unit’s rugged design is engineered to withstand harsh environments, making it suitable for both indoor and outdoor applications. The casing is built from durable materials that provide protection against moisture, dust, and physical impacts.

Furthermore, the ETA-PD8 is equipped with energy-efficient technologies, promoting sustainability in power consumption. It meets regulatory standards and certifications, which not only demonstrate its commitment to environmentally-friendly practices but also enhance its appeal in a market increasingly focused on sustainability.

In summary, the ETA Systems ETA-PD8 is more than just a power distribution unit; it is a comprehensive solution equipped with intelligent monitoring, modular design, advanced safety features, connectivity options, and energy-efficient technology. This combination of characteristics makes it an essential choice for organizations seeking reliable and efficient power management in today’s high-demand environments.