ETA Systems ETA-PD8 guide

ETA-PD8

Power Conditioner & Distribution Unit

WARNING – WHEN THE DEVICE IS IN USE

•To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to ETA Systems.

•Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the AC outlet and contact ETA Systems. Do not to attempt to continue operation with the product as this may cause fire or electric shock:

•Smoke or strange smell coming from the unit.

•If the product falls or the case is damaged.

•If water or any metallic objects falls into the product.

•If the power supply cord is damaged in any way.

•If the unit is malfunctioning.

•Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product's cover, as this may result in electric shock or fire.

•Do not place any containers with liquid or metallic objects on the top of the product. If any liquid spills into the unit, fire or electric shock may result.

•Never operate this product or touch the power supply cord during an electrical storm, electric shock may result.

•Never exceed the power rating on the product when connecting equipment. Fire and/or property damage may result.

•Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.

•Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy objects on the power cord, including the product itself, doing so may result in fire or electrical shock.

•Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic disaster may result.

•Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.

CAUTION – WHEN INSTALLING THE PRODUCT

•Installation of this product must be done by a certified electrician for a permanently connected apparatus provided neither with an all-pole mains switch nor an all-pole circuit breaker. A readily accessible disconnect device shall be incorporated in the building installation power wiring. The installation shall be carried out in accordance with all applicable installation rules in accordance with all applicable federal, state, and local laws, regulations, and safety codes and ordinances.

•Never install this product in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or steam are present. Fire and electric shock may result.

•Keep all sides of the unit at least 31⁄2" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.

CAUTION – WHEN THE DEVICE IS IN USE

•Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and property damage. In addition, the product itself may fall and cause injury and property damage.

•Contact ETA Systems for instructions on cleaning the inside of the unit. Large accumulations of dust inside the unit may result in heat buildup and fire.

•Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate on the power plug or inside the wall outlet.

•When cleaning the unit or the unit is not to be operated for an extended period, unplug the power cord from the wall.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 4 –

ETAsys.com

Specifications are subject to change without notice.

ETA-PD8 specifications

The ETA Systems ETA-PD8 is an advanced power distribution unit designed to cater to the needs of various applications in telecommunications, data centers, and network systems. Known for its robust performance and versatile capabilities, the ETA-PD8 stands out as a pivotal component for managing power efficiently.

One of the primary features of the ETA-PD8 is its intelligent power monitoring system. This system provides real-time data on power usage and load distribution, allowing for effective management and optimization of power resources. Users can access detailed statistics through an intuitive interface, enabling them to make informed decisions about power allocation and consumption.

The ETA-PD8 is designed with modularity in mind, featuring a flexible architecture that allows for scaling according to the demands of the environment. Its hot-swappable components facilitate uninterrupted operations, even during maintenance or upgrades. This characteristic is especially beneficial for critical infrastructures that require constant uptime.

Another significant aspect of the ETA-PD8 is its integration of advanced safety features. Overcurrent protection, surge protection, and thermal management solutions are built into the system to safeguard against electrical faults. This enhances the longevity of connected devices and ensures the reliability of operations in demanding settings.

In terms of connectivity, the ETA-PD8 supports various communication protocols, including SNMP and HTTP, enabling seamless integration with existing network management systems. This connectivity allows for remote monitoring and management, which is crucial for system administrators overseeing large installations.

The unit’s rugged design is engineered to withstand harsh environments, making it suitable for both indoor and outdoor applications. The casing is built from durable materials that provide protection against moisture, dust, and physical impacts.

Furthermore, the ETA-PD8 is equipped with energy-efficient technologies, promoting sustainability in power consumption. It meets regulatory standards and certifications, which not only demonstrate its commitment to environmentally-friendly practices but also enhance its appeal in a market increasingly focused on sustainability.

In summary, the ETA Systems ETA-PD8 is more than just a power distribution unit; it is a comprehensive solution equipped with intelligent monitoring, modular design, advanced safety features, connectivity options, and energy-efficient technology. This combination of characteristics makes it an essential choice for organizations seeking reliable and efficient power management in today’s high-demand environments.