3.Expand this dialog box by clicking on the More Info >> button.
4.Complete the information in this table:
Item No. | IP Configuration | Description | Your Setting |
|
|
|
|
1 | Host Name | Host Name |
|
|
|
|
|
2 | DNS Servers | Primary DNS |
|
|
|
|
|
3 |
| Secondary |
|
|
|
|
|
4 | Adapter Address | MAC Address |
|
|
|
|
|
5 | IP Address | WAN IP Address |
|
|
|
|
|
6 | Subnet Mask | WAN Subnet Mask |
|
|
|
|
|
7 | Default Gateway | WAN Gateway |
|
|
|
|
|
Tip: Next to the DNS Servers field, click the button to show the Secondary DNS (if available).
5.From the Windows Start button, choose Settings and select Control Panel.
6.In the Configuration tab, highlight the TCP/IP protocol line as- sociated with your network card adapter.
7.Click Properties to open the TCP/IP Properties dialog. Click the IP Address tab. Select Obtain an IP address automatically. Click OK.
8.Click OK again. Windows will begin copying files to your com- puter. Click Yes to restart your computer with the new settings.
Repeat steps
Note: Keep your Windows CD handy. You may be asked to insert it so that Windows can copy necessary files.
Windows NT/2000
1.From the Windows Start button, choose Run. In the dialog box, type command and click OK.
2.At the command line, type the command ipconfig /all and press Enter.
3.Fill in the table below with the data from the screen.
6 | FriendlyNET VPN Security Router |