ISPs use the information for authentication purposes, so you must select the check box and enter the requested information for your WAN type.
Item | Description |
| |
|
|
|
|
User Name | Account name (assigned by your ISP). |
| |
|
|
|
|
Password | Password for the account (assigned by your ISP). |
| |
|
|
|
|
Idle Time | Router attempts to keep the connection on (“keep alive”) |
| |
| until it has reached a specified idle time; enter a 0 to dis- |
| |
| able the keep alive feature. Some services will disconnect |
| |
| the modem when it has exceeded a maximum session time |
| |
|
|
|
|
Enable PPTP Client | If you have a PPTP connection, check this box to enable |
| |
| PPTP client. |
| |
|
|
|
|
My IP Address | The IP address provided to you by your ISP |
| |
|
|
|
|
Server IP Address | The IP address of the PPTP server provided by your ISP |
| |
|
|
|
|
Connection ID/Name | Optional (Enter the connection ID if your ISP requires it) |
| |
|
|
|
|
|
| PPPoE/PPTP Connection |
|
|
|
|
|
Some providers require the Ethernet address (the MAC address) of the computer that is connecting the Cable/DSL modem to authenti- cate the connection. If you are connecting the router to the modem instead, you must select the check box for Device MAC Address and enter the WAN MAC address of the router (found in the Device Status and Device Information pages).
Note: Do not enter the colons between the numbers, as the fields are already separated within the page.
Note: If you have a single computer attached to the Cable/DSL mo- dem, you may also use your computer’s network adapter card MAC Address to allow access to the Internet. Find your card’s MAC Ad- dress from Windows 98/Me by running winipcfg, or from Windows 2000/NT by running ipconfig /all. To find a Macintosh's Ethernet MAC address, select "Get Info” from the File menu of either the AppleTalk or TCP/IP Control Panel. Again, do not enter the colons that appear within the MAC address, as the fields are already sepa- rated within the page.
20 | FriendlyNET VPN Security Router |