D-Link WBR-2310 manual Connect to Another Router

Page 12

Section 2 - Installation

Connect to Another Router

If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network:

•Disable UPnP™

•Disable DHCP

•Change the LAN IP address to an available address on your network.The LAN ports on the router cannot accept a DHCP address from your other router.

To connect to another router, please follow the steps below:

1.Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer.

2.Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to admin and leave the password box empty. Click OK to continue.

3.Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue.

4.Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save Settings to continue.

5.Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.

D-Link WBR-2310 User Manual

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Table of Contents Wireless Security Troubleshooting Wireless BasicsWarranty Registration Networking BasicsProductPackageOverviewContents Introduction Features Hardware Overview ConnectionsLEDs Status LEDInstallation Before you BeginWireless Installation Considerations Connect to Cable/DSL/Satellite Modem Connect to Another Router Installation Configuration Web-based Configuration UtilitySetup Wizard Click Launch Internet Connection Setup Wizard to beginConfiguration Configuration Configuration Internet Setup Dynamic CablePPPoE DSL Pptp L2TP Big Pond Static assigned by ISP Wireless Settings Network Settings Dhcp Server Settings Virtual Server Protocol Type Select TCP, UDP, or ANY Port Forwarding Application Rules Network Filters Website Filters Configure Website Select Turn Website Filtering OFF, TurnFirewall Settings IP Address Enable Pptp Passthrough Enable L2TP Enable IPSecAdvanced Wireless Settings CTS ModeAdvanced Network Settings Administrator Settings Login Name accountTime Settings System Settings Update Firmware Ddns System Test Schedules Log Settings Device Information Log Wireless StatsSupport Wireless Security What is WEP?What is WPA? Next to Security Mode, select Enable WEP Security Configure WEPConfigure WPA-PSK Configure WPA Radius Connect to a Wireless Network Using Windows XPConfigure WEP Connecting to a Wireless Network Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility?What can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics What is Wireless? Wireless Local Area Network WlanWireless Personal Area Network Wpan HomeSmall Office and Home Office Centralize your router or Access Point Eliminate InterferenceWireless Modes SecurityNetworking Basics Check your IP addressStep Step Highlight Internet Protocol TCP/IP and click PropertiesTechnical Specifications Device ManagementLEDs Contacting Technical Support Phone SupportWarranty Limited WarrantyLimited Software Warranty Non-Applicability of WarrantyWhat Is Not Covered Disclaimer of Other WarrantiesLimitation of Liability Governing LawTrademarks Copyright StatementCE Mark Warning FCC StatementRegistration

WBR-2310 specifications

The D-Link WBR-2310 is a versatile wireless router that has made a mark in the networking world due to its reliable performance and practical features. Designed primarily for home and small office environments, this router provides a seamless blend of speed, security, and usability.

One of the standout features of the WBR-2310 is its wireless connectivity capabilities. It supports the 802.11g standard, which allows for a maximum wireless transmission rate of up to 54 Mbps. This speed is adequate for everyday internet activities such as web browsing, video streaming, and online gaming. The router's capability to operate on the 2.4 GHz band ensures that it covers a decent range while minimizing interference caused by common household appliances.

Security is another critical aspect of the WBR-2310. It offers multiple security protocols, including WPA/WPA2 and WEP, to protect your network from unauthorized access. The router also includes a built-in firewall, which serves as an additional layer of protection against external threats. Users can easily manage their security settings through a user-friendly web interface, making it simple to customize the network to meet specific security needs.

The WBR-2310 is equipped with four Ethernet ports, allowing for wired connections to devices like desktops and gaming consoles. This flexibility ensures that users can enjoy stable connections without relying solely on wireless capabilities. Additionally, the router supports NAT (Network Address Translation), which enables multiple devices to share a single public IP address.

Installation and setup of the WBR-2310 are straightforward, thanks to its Quick Setup Wizard. This feature guides users through the initial configuration process, making it accessible even for those with limited technical knowledge. Once set up, users can benefit from features like Quality of Service (QoS), which prioritizes bandwidth for certain applications, ensuring a smooth experience for activities that require consistent connectivity.

In summary, the D-Link WBR-2310 offers a blend of essential features and solid performance for home and small business users. With its 802.11g wireless connectivity, robust security options, multiple Ethernet ports, and easy setup, it delivers the reliability and efficiency that users expect from a modern router. Whether for casual browsing or more demanding tasks, the WBR-2310 remains a viable option in the realm of wireless networking.
Top Page Image Contents