D-Link WBR-2310 manual Internet Setup, Dynamic Cable

Page 19

Section 3 - Configuration

Internet Setup

Dynamic (Cable)

Dynamic IP Choose Dynamic IP Address to obtain IP Address Address: information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used

for Cable modem services.

Host Name: The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.

MAC Address: The default MAC Address is set to the WAN’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.

Clone MAC The default MAC address is set to the WAN’s Address: physical interface MAC address on the Broadband Router. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router.

It is not recommended that you change the default MAC address unless required by your ISP.

DNS Addresses: Enter the Primary DNS server IP address assigned by your ISP.

MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.

D-Link WBR-2310 User Manual

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Table of Contents Networking Basics Wireless SecurityTroubleshooting Wireless Basics Warranty RegistrationProductPackageOverviewContents Introduction Features Connections Hardware OverviewStatus LED LEDsBefore you Begin InstallationWireless Installation Considerations Connect to Cable/DSL/Satellite Modem Connect to Another Router Installation Web-based Configuration Utility ConfigurationClick Launch Internet Connection Setup Wizard to begin Setup WizardConfiguration Configuration Configuration Dynamic Cable Internet SetupPPPoE DSL Pptp L2TP Big Pond Static assigned by ISP Wireless Settings Network Settings Dhcp Server Settings Virtual Server Protocol Type Select TCP, UDP, or ANY Port Forwarding Application Rules Network Filters Configure Website Select Turn Website Filtering OFF, Turn Website FiltersIP Address Enable Pptp Passthrough Enable L2TP Enable IPSec Firewall SettingsCTS Mode Advanced Wireless SettingsAdvanced Network Settings Login Name account Administrator SettingsTime Settings System Settings Update Firmware Ddns System Test Schedules Log Settings Device Information Log Stats WirelessSupport What is WEP? Wireless SecurityWhat is WPA? Configure WEP Next to Security Mode, select Enable WEP SecurityConfigure WPA-PSK Configure WPA Radius Using Windows XP Connect to a Wireless NetworkConfigure WEP Connecting to a Wireless Network Configure WPA-PSK Connecting to a Wireless Network Why can’t I access the web-based configuration utility? TroubleshootingWhat can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics Wireless Local Area Network Wlan What is Wireless?Home Wireless Personal Area Network WpanSmall Office and Home Office Eliminate Interference Centralize your router or Access PointSecurity Wireless ModesCheck your IP address Networking BasicsStep Highlight Internet Protocol TCP/IP and click Properties StepDevice Management Technical SpecificationsLEDs Phone Support Contacting Technical SupportLimited Warranty WarrantyNon-Applicability of Warranty Limited Software WarrantyDisclaimer of Other Warranties What Is Not CoveredCopyright Statement Limitation of LiabilityGoverning Law TrademarksFCC Statement CE Mark WarningRegistration

WBR-2310 specifications

The D-Link WBR-2310 is a versatile wireless router that has made a mark in the networking world due to its reliable performance and practical features. Designed primarily for home and small office environments, this router provides a seamless blend of speed, security, and usability.

One of the standout features of the WBR-2310 is its wireless connectivity capabilities. It supports the 802.11g standard, which allows for a maximum wireless transmission rate of up to 54 Mbps. This speed is adequate for everyday internet activities such as web browsing, video streaming, and online gaming. The router's capability to operate on the 2.4 GHz band ensures that it covers a decent range while minimizing interference caused by common household appliances.

Security is another critical aspect of the WBR-2310. It offers multiple security protocols, including WPA/WPA2 and WEP, to protect your network from unauthorized access. The router also includes a built-in firewall, which serves as an additional layer of protection against external threats. Users can easily manage their security settings through a user-friendly web interface, making it simple to customize the network to meet specific security needs.

The WBR-2310 is equipped with four Ethernet ports, allowing for wired connections to devices like desktops and gaming consoles. This flexibility ensures that users can enjoy stable connections without relying solely on wireless capabilities. Additionally, the router supports NAT (Network Address Translation), which enables multiple devices to share a single public IP address.

Installation and setup of the WBR-2310 are straightforward, thanks to its Quick Setup Wizard. This feature guides users through the initial configuration process, making it accessible even for those with limited technical knowledge. Once set up, users can benefit from features like Quality of Service (QoS), which prioritizes bandwidth for certain applications, ensuring a smooth experience for activities that require consistent connectivity.

In summary, the D-Link WBR-2310 offers a blend of essential features and solid performance for home and small business users. With its 802.11g wireless connectivity, robust security options, multiple Ethernet ports, and easy setup, it delivers the reliability and efficiency that users expect from a modern router. Whether for casual browsing or more demanding tasks, the WBR-2310 remains a viable option in the realm of wireless networking.
Top Page Image Contents