D-Link DWL-3600AP manual Installation, Power on the access point, Configure the access point

Installation

Power on the access point

To power on the DWL-3600AP, you can use ONE of the following methods:

1.Connect the supplied power adapter

OR

2.Plug one end of an Ethernet cable into the LAN port of the DWL-3600AP and the other end into a port on a power over Ethernet (PoE) switch.

Configure the access point

To set up and manage the DWL-3600AP, use one of the following methods:

•Manage the access point from the computer: Connect the access point and your computer directly via a straight-through Ethernet cable.

•Manage the access point from the computer via the Switch or Router: Connect the access point and your computer to the same switch or router.

•Manage the access point from the computer via the Unified Wireless Switch or Wireless Controller: Connect the access point to a Unified Wireless Switch or Wireless Controller. Connect your computer to the same network as that of the Unified Wireless Switch or Wireless Controller.

4  D-Link DWL-3600AP Quick Install Guide