MartinLogan CW10 user manual AC Power Connection Replacing the Fuse, Break-In

Page 8

AC Power Connection

Replacing the Fuse

The power cord should be firmly inserted into any conve- nient AC wall outlet. The CW10 also integrates a signal sensing power supply that automatically switches off after sensing no music signal for several minutes (this will cause the status LED to turn off).

Your CW10 subwoofer is wired for the power service sup- plied in the country of original consumer sale. The AC power rating applicable to a particular unit is specified both on the packing carton and on the serial number plate attached to the subwoofer.

If you remove your CW10 subwoofer from the country of original sale, be certain that AC power supplied in any sub- sequent location is suitable before connecting and operating the subwoofer. Substantially impaired performance or severe damage may occur to the CW10 subwoofer if operation is attempted from an incorrect AC power source.

If the fuse in your CW10 should require changing, turn off and unplug your CW10 before removing the fuse. Replace the bad fuse with a matching T 1.6A L 250V (T 0.8A L 250V if you are in a region using 230V).

Break-In

Our custom made woofers require approximately 50 hours of break-in at moderate listening levels before their optimal performance occurs. This will factor in on any critical listening and judgment.

8Connections and Control Settings

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 1 0 tm Serial Numbers Contents Introduction Introduction & Installation in BriefInstallation in Brief About the Controls Connections and Control Settings Before Connecting the CW10Channel Mode Signal .Connection .see .figureMulti-Channel/LFE Mode Set the crossover switch to Bypass LFEAC Power Connection Replacing the Fuse Break-InPlacement Installing in a CabinetListening Position Ask Your DealerTerminology Room AcousticsYour Room Home Theater Front .Left .and .Front .RightCenter .Channel Surround .SpeakersFrequently Asked Questions Frequently Asked QuestionsTroubleshooting TroubleshootingNo .Output Muddy .BassSpecifications Warranty and RegistrationService General InformationDimensional Drawings Glossary of Audio Terms Glossary of Audio Terms Rev. #072810

CW10 specifications

The MartinLogan CW10 is a sophisticated in-wall subwoofer that redefines the boundaries of audio performance while seamlessly integrating into any living space. Designed for those who value both sound quality and aesthetic appeal, the CW10 delivers deep, impactful bass without sacrificing room aesthetics.

One of the main features of the CW10 is its advanced subwoofer technology, which includes a high-performance 10-inch cone driver. This driver is engineered to reproduce low-frequency sounds with immense accuracy and power, allowing users to experience thumping bass that is both rich and controlled. The driver operates within a carefully crafted enclosure, optimizing its performance and ensuring minimal distortion, which is critical for both music and home theater applications.

The CW10 also employs MartinLogan's patented Vojtko crossover technology. This feature is integral in managing the transition between high and low frequencies, ensuring that every note and nuance is captured and delivered seamlessly. The crossover helps maintain the dynamic range and tonal balance that listeners demand, making it an excellent choice for audiophiles and casual listeners alike.

One of the primary characteristics that sets the CW10 apart is its compact and discreet design. The subwoofer is intended for in-wall installation, allowing it to blend effortlessly into wall spaces while freeing up valuable floor space. The flush mount installation maintains the room's visual integrity, making it an ideal solution for modern living environments where design is just as important as performance.

Moreover, the CW10 is equipped with an adjustable low-pass filter, allowing users to tailor the subwoofer's response to suit their specific room acoustics and personal preferences. This level of customization enhances the listening experience, ensuring that the subwoofer works harmoniously with existing speakers and other audio equipment.

The CW10 also features a durable and aesthetically pleasing grille that can be painted to match your wall color, further enhancing its ability to integrate into any home decor.

In conclusion, the MartinLogan CW10 is a feature-rich in-wall subwoofer that combines advanced audio technologies with a sleek, unobtrusive design. With its powerful driver, innovative crossover technology, and customizable settings, the CW10 is an exceptional choice for anyone looking to elevate their audio experience while maintaining the elegance of their living space.
Top Page Image Contents