MartinLogan CW10 user manual Placement, Listening Position, Ask Your Dealer, Enjoy Yourself

Page 9

Placement

Listening Position

Generally, subwoofers have the most output when placed in the corner of a room. However, this can also exagger- ate the subwoofers output making blending difficult. We recommend starting by placing the CW10 in a corner. If, after the full range of tuning techniques have been employed, the subwoofer sounds like it has too much upper bass energy try pulling it away from the wall, toward the listening position. This will lessen the reinforcement of these problematic frequencies from the wall and likely smooth out the response. Repeat the tuning techniques with the woofer controls after you move it (see figure 6).

Ask Your Dealer

Your MartinLogan dealer can suggest many options for optimal subwoofer placement. They also have many tools at their disposal, such as experience, familiarity with the associated equipment, and even sound analysis equipment which may make the task of determining optimal subwoofer placement easier.

Enjoy Yourself

The CW10 is a very refined subwoofer and will benefit from care in setup. With the above placement tips in mind you will find, over months of listening, that small changes can result in measurable differences. As you live with your subwoofer, do not be afraid to experiment with positioning until you find the optimal relationship between your room, settings and subwoofer that gives you the best results. Your efforts will be rewarded.

Installing in a Cabinet

When placing the CW10 inside of a cabinet it is recom- mended that there be a minimum of three inches of open space between the cabinet and the front and back sides (see figure 7).

Figure 6. CW10 Subwoofers as the LFE (effects) channels, MartinLogan Motion 12 speakers as front channels, and Motion 4 speakers as surround (effects) channel and Motion 8 as the center channel. Note the corner placement of the CW10 at the front of the listening room.

Figure 7. Placing the CW10 in a cabinet requires a minimum of three inches of open space on the front and back.

Placement 9

Image 9
Contents 1 0 tm Serial Numbers Contents Introduction & Installation in Brief Installation in BriefIntroduction About the Controls Before Connecting the CW10 Connections and Control SettingsChannel Mode Signal .Connection .see .figureSet the crossover switch to Bypass LFE Multi-Channel/LFE ModeBreak-In AC Power Connection Replacing the FuseInstalling in a Cabinet PlacementListening Position Ask Your DealerRoom Acoustics Your RoomTerminology Front .Left .and .Front .Right Home TheaterCenter .Channel Surround .SpeakersFrequently Asked Questions Frequently Asked QuestionsTroubleshooting TroubleshootingNo .Output Muddy .BassWarranty and Registration SpecificationsService General InformationDimensional Drawings Glossary of Audio Terms Glossary of Audio Terms Rev. #072810

CW10 specifications

The MartinLogan CW10 is a sophisticated in-wall subwoofer that redefines the boundaries of audio performance while seamlessly integrating into any living space. Designed for those who value both sound quality and aesthetic appeal, the CW10 delivers deep, impactful bass without sacrificing room aesthetics.

One of the main features of the CW10 is its advanced subwoofer technology, which includes a high-performance 10-inch cone driver. This driver is engineered to reproduce low-frequency sounds with immense accuracy and power, allowing users to experience thumping bass that is both rich and controlled. The driver operates within a carefully crafted enclosure, optimizing its performance and ensuring minimal distortion, which is critical for both music and home theater applications.

The CW10 also employs MartinLogan's patented Vojtko crossover technology. This feature is integral in managing the transition between high and low frequencies, ensuring that every note and nuance is captured and delivered seamlessly. The crossover helps maintain the dynamic range and tonal balance that listeners demand, making it an excellent choice for audiophiles and casual listeners alike.

One of the primary characteristics that sets the CW10 apart is its compact and discreet design. The subwoofer is intended for in-wall installation, allowing it to blend effortlessly into wall spaces while freeing up valuable floor space. The flush mount installation maintains the room's visual integrity, making it an ideal solution for modern living environments where design is just as important as performance.

Moreover, the CW10 is equipped with an adjustable low-pass filter, allowing users to tailor the subwoofer's response to suit their specific room acoustics and personal preferences. This level of customization enhances the listening experience, ensuring that the subwoofer works harmoniously with existing speakers and other audio equipment.

The CW10 also features a durable and aesthetically pleasing grille that can be painted to match your wall color, further enhancing its ability to integrate into any home decor.

In conclusion, the MartinLogan CW10 is a feature-rich in-wall subwoofer that combines advanced audio technologies with a sleek, unobtrusive design. With its powerful driver, innovative crossover technology, and customizable settings, the CW10 is an exceptional choice for anyone looking to elevate their audio experience while maintaining the elegance of their living space.