DSL-524T ADSL Router Manual
About This User’s Guide
This manual provides instructions on how to install the
Before You Start
Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the necessary information and equipment on hand before beginning the installation.
Installation Overview
The procedure to install the Router can be described in general terms in the following steps:
1.Gather information and equipment needed to install the device. Before you begin the actual installation make sure you have all the necessary information and equipment.
2.Install the hardware, that is, connect the cables (Ethernet and telephone) to the device and connect the power adapter.
3.Check the IP settings on your computer and change them if necessary so the computer can access the
4.Use the
Installation Requirements
Information you will need from your ADSL service provider:
| This is the Username that is used to log on | Record your info |
Username | to your ADSL service provider’s network. It is | here. |
| commonly in the form − user@isp.com. |
|
| This is the Password that is used, in |
|
Password | conjunction with the Username above, to log |
|
| on to your ADSL service provider’s network. |
|
Connection | This is the method that your ADSL service |
|
provider uses to send and receive data |
| |
Protocol |
| |
between the Internet and your computer. |
| |
|
| |
| This is the Virtual Path Identifier (VPI). It is |
|
| used in conjunction with the Virtual Channel |
|
VPI | Identifier (VCI) below, to identify the data |
|
| path between your ADSL service provider’s |
|
| network and your computer. |
|
| This is the Virtual Channel Identifier (VCI). It |
|
| is used in conjunction with the VPI above to |
|
VCI | identify the data path between your ADSL |
|
| service provider’s network and your |
|
| computer. |
|
12