D-Link DSL524T manual This test will check the Ethernet connection of your Router

Page 83

DSL-524T ADSL Router Manual

Figure 6- 7. Diagnostics window

To perform the following tests, choose the PVC (Private Virtual Connection) that you wish to test and click Apply. Test results will either be displayed as Pass or Fail. The following tasks will be performed:

 

Testing Ethernet

This test will check the Ethernet connection of your Router.

 

 

LAN Connection

 

 

 

 

 

 

 

Testing ADSL

This test will check the ADSL line connected to your Router.

 

Synchronization

 

 

 

Testing ATM

This test will check the PVC connectivitiy by sending out an OAM

 

 

OAM segment

(Operation Administration Management) packet. If the remote device

 

 

ping

on this segment returns the ping packet, the PVC has passed the test

 

 

 

and a Pass result will appear.

 

 

Testing ATM

This test will check the PVC connectivitiy by sending out an OAM

 

 

OAM end to end

(Operation Administration Management) packet. If the remote device

 

 

ping

returns the ping packet, the PVC has passed the test and a Pass result

 

 

 

will appear.

 

 

Ping Primary

This test will check to see if the Primary DNS is accessible from the

 

 

 

 

 

 

 

83

 

Image 83
Contents DSL-524T Adsl Router User’s Guide DSL-524T Adsl Router Manual Hardware Limited WarrantyWichtige Sicherheitshinweise Software Warranty and Registration Information for USA OnlyDSL-524T Adsl Router Manual European Community Declaration of Conformity Avertissement AUX Utilisateurs Installazione ED Utilizzo DI Sitemi Radio LAN AD USO Privato Accesso Alle Fonti DI Informazione Table of Contents Status Before You Start Installation RequirementsAbout This User’s Guide LAN Subnet Mask Configured to Obtain an IP addressLAN IP address For the DSL-524TDSL-524T Adsl Router Manual Low Pass Filters What is ADSL?Introduction Router Description and OperationEthernet Port NIC Adapter Account Information User Name and PasswordRouter Features Web BrowserPacking List Front PanelRear Panel Network Connection Hardware InstallationHub or Switch to Router Connection LocationFactory Reset Button Power On RouterConfiguring IP Settings on Your Computer Configuring the Router for the First TimeConfigure IP Settings Windows Me Click the Specify an IP address option Accessing the Configuration ManagerEnter Network Password dialog box Configure the Router with the Configuration WizardHome Setup Choose Your Time Zone Opening Setup windowBridge Mode Setting the Adsl ConnectionRestart VPI/VCI Static IP AddressRestart Dynamic IP Address Restart Choose between PPPoE LLC , PPPoA LLC or PPPoE VC-Mux PPPoE/PPPoARestart Home WAN ConfigurationWAN Settings ATM VC SettingClick Apply to set the Dynamic IP settings for your DSL-524T Static IP Address Click Apply to set the Static IP address for the DSL-524T PPPoE/PPPoA On the instructions of your ISP ATM DSL-524T Adsl Router Manual LAN Settings window LAN ConfigurationDhcp Dhcp configuration window DSL-524T Adsl Router Manual DNS 10. Dynamic DNS window Dynamic DNSUPnP Advanced ConfigurationUPnP window Virtual ServerVirtual Server window LAN Clients LAN Clients window Snmp Snmp window Filters Filters window Destination Port Protocol Action Bridge FiltersBridge Filters window Routing Table window Routing TableClick Apply to set the routing information configured DMZ Click Apply when your configuration is complete Firewall window FirewallDSL-524T Adsl Router Manual RIP PPP Window above displays the following information Adsl 12. Adsl window ATM VCC QoS 14. QoS window Tools AdminTime Administrator Settings windowTime window Remote LogRemote Log System System Settings windowFirmware Firmware Upgrade windowTest MiscellaneousThis test will check the Ethernet connection of your Router Router Device Info StatusDisplays the current NAT staus implemented on the Router NATDhcp Clients Device Log window LogStats window for Ethernet StatisticsFollowing information is displayed Annex modeHelp Help Window DSL-524T Adsl Router Manual Data Transfer Rate Technical SpecificationsProtocols Temperature Humidity PowerAdapter Power Temperature StorageManual IP Address Assignment IP Address SetupUsing the Default IP Address Assigning Network IP AddressesChanging the IP Address of the Router Using DhcpComputer 10.0.0.3 255.255.255.0 10.0.0.1 IP Addresses IP ConceptsClas Beginning Ending Address 10.0.0.0 10.255.255.25 IP Network Classes172.16.0.0 172.31.255.25 192.168.0.0 192.168.255.2 Class a 255.0.0.0 Class B 255.255.0.0 Class C 255.255.255.0 IP Class Subnet MaskMicrofilters Microfilters and SplittersLine Splitter International Offices Print, type or use block letters Registration Card