D-Link DSA-3200 Using The Setup Wizard continued, Specify the DHCP Server Settings, Click Next

Page 7
Specify the DHCP Server Settings.

Using The Setup Wizard (continued)

Specify the DHCP Server Settings.

Specify a range of IP addresses to assign the DHCP clients. The range is entered in the format “Start IP – End IP” i.e. 192.168.1.101 – 192.168.1.200. Enter the Domain Name and Primary DNS Server settings for the clients. Entering a Secondary DNS Server is optional.

Click Next

Enter the desired Wireless Network SSID, select RF Channel (auto or manual), and Wireless Transmission Mode. The Sync to Ticket option will automatically add the SSID of the Internal

AP to the On-Demand User Receipt.

Click Next

Configure the Public WLAN Port:

IP Address: The IP address used for the DSA-3200 on the Public WLAN.

Subnet Mask: The Subnet Mask of the DSA-3200 on the Public WLAN.

DHCP Server Enabled/Disabled: With DHCP Server enabled, IP addresses are provided automatically to clients on the Public WLAN.

Click Next

7

Image 7
Contents DSA-3200 Check Your Package ContentsDSA-3200 Airspot Wireless G Public/Private Gateway CD-ROM containing Manual and WarrantyPublic LAN Ports Connect Connecting The DSA-3200 To Your NetworkReset Button Push Once Power ReceptorA. Power on the DSA-3200 Connecting The DSA-3200 To Your Network continuedClick Enter Using The Setup WizardClick Run Wizard Using The Setup Wizard continuedClick Next Enter a new admin password and retype it for verificationEnter the system information Select an Option Click NextSpecify the DHCP Server Settings Click Restart Click Next Setup Wizard is Now CompleteClick OK Appendix - IP ConfigurationMicrosoft Windows XP Go to Start right click onGo to the Apple Menu and Select System Appendix - IP Configuration continuedSelect Using DHCP in the Configure pull down menu Apple Mac OSPage Tech Support for customers within the United States Technical SupportTech Support for customers within Canada
Related manuals
Manual 113 pages 17.69 Kb