D-Link warranty Connecting The DSA-3200 To Your Network continued, A. Power on the DSA-3200

Connecting The DSA-3200 To Your Network (continued)

A.Power on the DSA-3200.

B.Connect an Ethernet cable from a Public LAN port to a switch or wireless access point on your public network. The Public LAN LED will illuminate to indicate a proper connection. If the Public LAN LED doesn’t light up, please check the connections.

C.Connect an Ethernet cable from a Private LAN port to an Ethernet port on your private network’s switch. If properly connected, the Private LAN LED will illuminate. (Note: For configuration purposes a computer can be connected directly to this port using a standard Ethernet cable)

D.Attach an Ethernet cable to the WAN port on the back panel of the DSA-3200. Connect the other end to a router or directly to a broadband modem. The WAN LED light will illuminate to indicate proper connection.

When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this:

3