3.2.1.1.2 Setting the SNMP Community String
Type the known Read/Write Community string in the Community field (the default
string is public for read and private for read/write) and click the 
button to confirm.
3.2.1.1.3Assigning and Editing IP Addresses Manually (based on MAC addresses)
1.Click the Set IP button. The Set IP dialog box appears.
Figure 10: The Set IP Dialog Box
2.Type the parameters in the appropriate fields and click OK; the MAC address is shown on the bottom label of the Indoor and Outdoor units. A message box is displayed notifying you when the changes are to take affect. This feature can be used only if the
22