NETGEAR WNR2000v5 user manual Specify the IP Addresses That the Router Assigns

Page 59

N300 WiFi Router

The IP address and subnet mask identify which addresses are local to a specific device and which must be reached through a gateway or router.

7.Click the Apply button. Your settings are saved.

If you changed the LAN IP address of the router, you are disconnected when this change takes effect.

To reconnect, close your browser, relaunch it, and log in to the router.

Specify the IP Addresses That the Router Assigns

By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address of the router.

These addresses must be part of the same IP address subnet as the router’s LAN IP address. Using the default addressing scheme, define a range between 192.168.0.2 and 192.168.0.254, although you can save part of the range for devices with fixed addresses.

The router delivers the following parameters to any LAN device that requests DHCP:

•An IP address from the range that you define

•Subnet mask

•Gateway IP address (the router’s LAN IP address)

•DNS server IP address (the router’s LAN IP address)

To specify the pool of IP addresses that the router assigns:

1. Launch a web browser from a computer or wireless device that is connected to the network.

2. In the address field of the web browser, enter www.routerlogin.net or www.routerlogin.com.

A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

Specify Network Settings

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents N300 WiFi Router Trademarks SupportCompliance Contents Control Access to the Internet Appendix a Supplemental Information Hardware Setup Front Panel Unpack Your RouterLED and button descriptions Position Your Router Rear Panel To cable your router Cable Your RouterConnect to the Network Access the Router  To find and select the WiFi network Wired ConnectionWiFi Connection  To use WPS to connect to the WiFi network To log in to the router Types of LoginsLog In to the Router Specify Initial Settings Select Advanced Setup Wizard Use the Setup Wizard To use the Setup Wizard  To specify the Internet connection settings Manually Set Up the Internet ConnectionSpecify an Internet Connection Without a Login  To view or change the basic Internet setup Specify an Internet Connection That Uses a LoginSelect Internet Specify IPv6 Internet Connections  To set up an IPv6 Internet connectionInternet Connection Type list, select Auto Detect Requirements for Entering IPv6 AddressesUse Auto Detect for an IPv6 Internet Connection Specify Initial Settings Use Auto Config for an IPv6 Internet Connection Set Up a 6to4 Tunnel IPv6 Internet Connection Specify Initial Settings  To set up a fixed IPv6 Internet connection Set Up a Pass Through IPv6 Internet ConnectionSet Up a Fixed IPv6 Internet Connection  To set up a pass-through IPv6 Internet connectionSpecify Initial Settings  To set up an IPv6 Internet connection with a Dhcp server Set Up a Dhcp IPv6 Internet ConnectionInternet Connection Type list, select PPPoE Set Up a PPPoE IPv6 Internet Connection To set up a PPPoE IPv6 Internet connection Specify Initial Settings  To change the MTU size Change the MTU SizeCommon MTU sizes Select Advanced Setup WAN SetupOptimize Performance Optimize Internet Gaming with Upstream QoS Prioritize Internet Traffic with Quality of Service To enable upstream QoS Optimize Internet Streaming with QoS  To enable QoS for Internet access To add a QoS rule for a service Add QoS Rules by Service To add a QoS rule for a device Select Advanced Setup QoS SetupAdd a QoS Rule by Device  To edit a QoS rule Edit a QoS Rule To delete a QoS rule Delete a QoS Rule To delete all QoS rules Wi-Fi Multimedia Quality of Service To disable WMM QoS Delete All QoS RulesImprove Network Connections with Universal Plug and Play Select Advanced Advanced Setup UPnP  To enable Universal Plug and PlayOptimize Performance Control Access to the Internet Select Parental Controls Set Up Parental Controls To set up Live Parental Controls Control Access to the Internet  To block Internet sites Use Keywords to Block Internet SitesClick the Take me to the status screen button  To delete keywords from the list Select Advanced Security Block SitesSelect Advanced Security Block Services Block Services from the Internet To block services Control Access to the Internet  To specify a trusted computer Schedule When to Block Internet Sites and ServicesAvoid Blocking on a Trusted Computer  To schedule blocking To set up email notifications Set Up Security Event Email NotificationsControl Access to the Internet Specify Network Settings  To view or change the WAN settings View or Change the WAN Settings To set up a default DMZ server Set Up a Default DMZ Server To change the router’s device name Select Advanced Setup LAN SetupChange the Router’s Device Name LAN IP address Change the LAN TCP/IP Settings To change the LAN TCP/IP settings Specify the IP Addresses That the Router Assigns  To reserve an IP address Reserve LAN IP Addresses To delete a reserved address entry  To edit a reserved address entry To use the WPS Wizard Use the WPS Wizard for WiFi Connections To specify basic wireless settings Specify Basic WiFi SettingsSpecify Network Settings Specify Network Settings WPA/WPA2 Enterprise Change the WiFi Security Option To change the WPA settings  To set up the router as an AP Use the Router as a Wireless Access Point To set up a guest network Set Up a WiFi Guest NetworkSelect Advanced Advanced Setup Wireless AP Select Guest Network  To enable or disable the wireless radio Control the Wireless RadioUse the WiFi On/Off Button Enable or Disable the Wireless Radio To set up the wireless schedule Set Up a WiFi ScheduleSelect Advanced Advanced Setup Wireless Settings  To specify WPS settings Specify WPS SettingsDynamic DNS  To set up Dynamic DNSSelect the Use a Dynamic DNS Service check box Select Advanced Advanced Setup Dynamic DNSManage Your Network  To view router Internet port information View Router InformationView Internet Port Information  To view router status and usage information To display Internet port statistics Display Internet Port Statistics To check the Internet connection status Check the Internet Connection Status To view wireless settings View Wireless Settings To view guest network settings View Guest Network SettingsView Logs of Router Activity Reboot the Router To reboot the router  To view and customize logs Select Advanced Administration Logs To monitor Internet traffic Select Advanced Advanced Setup Traffic MeterMonitor Internet Traffic  To back up the router’s configuration settings Manage the Router Configuration FileBack Up Settings  To restore configuration settings that you backed up Restore Configuration SettingsSelect Advanced Administration Backup Settings  To erase the configuration settings Change the admin PasswordErase the Current Configuration Settings Do not interrupt the reboot processRemote Management  To set the password for the user name adminSelect Advanced Administration Set Password  To set up remote management  To use remote access Specify Internet Port Settings  To forward specific incoming protocols Set Up Port Forwarding to a Local ServerClick the Add Custom Service button Add a Custom Port Forwarding Service To add a custom service  To delete a port forwarding entry Edit a Port Forwarding ServiceDelete a Port Forwarding Entry  To edit a port forwarding entry To make a local web server public Application Example Make a Local Web Server PublicHow the Router Implements the Port Forwarding Rule  To add a port triggering service Set Up Port TriggeringAdd a Port Triggering Service Specify Internet Port Settings Application Example Port Triggering for Internet Relay Chat Troubleshooting Admin Password Forgotten Passwords To use a wired connection to view WiFi settings WiFi PasswordsChanges Not Saved WiFi ConnectionsTroubleshoot with the LEDs Apply Power to the Router and Check the LEDsPower LED Is Off or Blinking  To apply power to the router and check the LEDsInternet LEDs Is Off Power LED Stays AmberWiFi LED Is Off Cannot Log In to the Router To check the WAN IP address Router Cannot Access the InternetTroubleshoot Internet Browsing  To troubleshoot a PPPoE Internet connection Troubleshoot a PPPoE Internet Connection To ping the router from a computer running Windows Troubleshoot Your Network Using the Ping UtilityTest the LAN Path to Your Router Test the Path from Your Computer to a Remote DeviceTroubleshoot IP Addresses Troubleshooting 109 Supplemental Information  To restore the factory default settings Factory SettingsSupplemental Information 112 Router specifications Technical Specifications
Related manuals
Manual 2 pages 47.93 Kb

WNR2000v5 specifications

The NETGEAR WNR2000v5 is a versatile wireless router designed to provide reliable performance for home and small office networks. It operates on the 802.11n wireless standard, allowing users to experience fast and efficient internet connectivity. With a maximum data throughput of up to 300 Mbps, the WNR2000v5 is well-suited for streaming high-definition videos, online gaming, and browsing the web simultaneously across multiple devices.

One of the notable features of the WNR2000v5 is its advanced wireless technology, which includes the use of multiple antennas to enhance the range and quality of the wireless signal. This ensures that users can connect to the network from various locations within a home or office, reducing dead spots and providing a stable connection. The router supports both 2.4 GHz frequency bands, which offer improved coverage but may have lower speeds compared to the 5 GHz bands found in dual-band routers.

Security is a top priority for any home network, and the WNR2000v5 addresses this with robust encryption protocols such as WPA2. This safeguard protects personal data and sensitive information from unauthorized access. Additionally, the router offers a built-in firewall and a feature known as "Wi-Fi Protected Setup" to simplify the connection of compatible devices securely.

The WNR2000v5 is equipped with four Fast Ethernet ports, allowing users to connect wired devices directly for optimal performance. This is particularly beneficial for devices that require stable connections, such as gaming consoles or desktop computers. The USB port on the router enables users to connect external storage devices, facilitating easy access and file sharing across the network.

Setup and management of the WNR2000v5 are user-friendly, featuring a straightforward web interface that allows users to configure settings easily. The router supports Quality of Service (QoS) settings, enabling users to prioritize bandwidth for specific applications and devices. This feature is particularly useful in households where multiple users are online simultaneously, ensuring everyone enjoys a fast and stable internet experience.

In summary, the NETGEAR WNR2000v5 is a powerful and affordable solution for those seeking dependable wireless connectivity. With its combination of advanced wireless technology, strong security features, and easy management options, it serves as an excellent choice for enhancing home or small office networking needs. Whether streaming content, engaging in online gaming, or simply browsing the internet, this router delivers a reliable and efficient performance to meet the demands of modern users.
Top Page Image Contents