NETGEAR WNHDE111 5GHz user manual Key Hardware Features, Front Panel, Illuminated Power LED

Page 17

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

Key Hardware Features

Before you install and connect your bridge, take a moment to become familiar with its front and back panels—especially the status light and Push N Connect push button on the front panel.

Front Panel

The lights on the front panel indicate the operating status of the bridge.

Illuminated Power LED

On – Amber

The unit is performing the power-on diagnostic tests.

On – Green

The power is on and the router is ready.

Fast blink – Green

A software update is in progress.

Slow blink – Green

There is a problem with the wireless router software.

Off

Power is not being supplied to the unit, the wireless radio is

 

turned off, or the LED push button switch on the back is off.

Illuminated WPS Push 'N' Connect Button

On – Amber

The unit is performing the power-on diagnostic tests.

On – Green

The wireless range extender has acquired an Internet

 

address.

Blink – Green

Data is being communicated with the Internet.

Off

Power is not being supplied to the unit, or the LED push button

 

switch on the back is off.

REVIEWERS: PLEASE VERIFY

Figure 1-1

Note: Pressing the LED On/Off button on the back of the unit turns off all the LEDs, including the these on the front (Power, and WPS), as well as those on the rear (Ethernet status).

Getting Acquainted

1-3

v1.1, May 2008

Page 16 Page 18
Image 17
Page 16 Page 18
Contents NETGEAR, Inc WNHDE111 5GHz Wireless-N HD AccessRegulatory Compliance Information Europe EU Declaration of Conformity FCC Guidelines for Human Exposure FCC Requirements for Operation in the United StatesFCC Information to User FCC Radio Frequency Interference Warnings & Instructions FCC Declaration Of ConformityModel Number Product and Publication DetailsContents Chapter Securing My Wireless Appendix a Technical Specifications V1.1, May Conventions, Formats, and Scope About This ManualHow to Print This Manual How to Use This ManualPart Number Version Date Description Revision HistoryPublication Revision History Xiv About This Manual Chapter Getting Acquainted Unpacking Your New Wireless-N AccessPoint/BridgePrepare for Installation Illuminated Power LED Key Hardware FeaturesFront Panel Illuminated WPS Push N Connect ButtonConnectors, Buttons, and Switches Back Panel Connectors, Buttons, and SwitchesProduct label information Key Back Panel Label Information1TX18149020CB Positioning Your Unit What If Some of My Devices Don’t Support WPS? Chapter Easy Secure Wireless SetupMy Wireless Devices Setup to Use Comment Access Point Mode WPS Setup WPS Push Button Client Setup WPS PIN Entry Setup of WIreless Clients Setting Up a Pair of WNHDE111 Units at Once Setting Up Two WNHDE111 UnitsAdding a Second WNHDE111 to Your Network Later 1TX18149020CB Connecting Other Devices to a WNHDE111V1.1, May Chapter Making Changes Viewing or Changing SettingsUsing the Smart Wizard Configuration Assistant Names of units discovered Using the Web Browser Interface Using Automatic Firmware Update upon Login V1.1, May V1.1, May V1.1, May Choosing Appropriate Wireless Security Chapter Securing My WirelessSecurity options Range up to 500 foot radius Wireless dataOther Features That Enhance Security Wireless Security OptionsViewing Basic Wireless Settings Changing Wireless Security SettingsConfiguring WEP Wireless Security Configuring WPA Wireless Security Viewing Advanced Wireless SettingsUsing Push N Connect Wi-Fi Protected Setup Using the Software Button in the Add WPS Client Screen Push Button ConfigurationUsing the Physical Push Button Security PIN Entry Using the Unit’s Security PINUsing the Wireless Client’s Security PIN Adding Additional Non-WPS-Enabled Clients Enabling Wireless IsolationAdding Additional WPS-Enabled Clients Restricting Wireless Access by MAC Address Select the Turn Access Control On check box Changing the Administrator PasswordUsing the Network Settings Options Chapter Customizing Your Wireless NetworkConfiguring the Access Point Parameters Using the Dhcp Server Wireless Repeating Also Called WDSV1.1, May Optimizing Wireless Performance Chapter Fine-Tuning Your NetworkReduce interference Wireless Intelligent Stream Handling Wish Wish Options This table below describes the Wish optionsUsing WMM QoS for Wireless Multimedia Applications V1.1, May Viewing Status and Log Information Chapter Using Network Management ToolsField Description Device Info Status FieldsWish Logs Traffic Statistics Viewing a List of Attached Devices Backing Up and Restoring the Configuration Backing Up Your ConfigurationManaging the Configuration File Upgrading the Software Erasing the ConfigurationUpgrading Manually to New Software Upgrading Automatically to New SoftwareV1.1, May Be sure to restart your network in this sequence Chapter TroubleshootingTroubleshooting Quick Tips Make sure that the Ethernet cables are securely plugged Troubleshooting Basic FunctionsPower light is not on or is blinking Wireless or Ethernet port lights are not on Troubleshooting the Web Configuration InterfaceRestoring the Default Configuration and Password Default Configuration Settings Appendix a Technical SpecificationsFeature Default Setting Login WirelessPower Adapter Feature Default SettingPhysical Specifications Environmental SpecificationsInterface Specifications Restoring the Default User Name and PasswordFeature Default Setting Electromagnetic Emissions To restore the factory default configuration settings Document Link Appendix B Related DocumentsV1.1, May Index Index-2 Index-3 Index-4

WNHDE111 5GHz specifications

The NETGEAR WNHDE111 is a powerful dual-band wireless adapter designed to enhance connectivity and performance for a variety of devices. Operating on the 5GHz band, this device excels in delivering high-speed wireless connections, making it an excellent choice for users who stream HD videos, play online games, or engage in other bandwidth-intensive activities.

One of the standout features of the WNHDE111 is its support for the Wireless-N technology, which allows for increased data transfer rates and extended range compared to its predecessors. This device is capable of delivering speeds of up to 300 Mbps, ensuring a smooth experience when multiple devices are connected to the network. The dual-band capability means users can switch between the 2.4GHz and 5GHz bands, allowing for optimized usage depending on their connectivity needs.

The WNHDE111 is equipped with MIMO (Multiple Input Multiple Output) technology, which utilizes multiple antennas to send and receive more data simultaneously. This helps to reduce dead spots and improves overall wireless coverage, making it ideal for larger homes or office spaces where signal strength might be an issue.

Installation of the NETGEAR WNHDE111 is straightforward, with a simple plug-and-play setup that doesn’t require advanced technical skills. Users can connect the adapter to their gaming consoles, smart TVs, or computers via USB, making it a versatile solution for various devices. The device is also backward compatible with older wireless standards, ensuring it can connect seamlessly with existing networks.

Security is also a priority for the WNHDE111, supporting the latest encryption methods such as WPA and WPA2 to protect user data from unauthorized access. With easy-to-use security features, users can ensure their networks are secure without compromising on performance.

Moreover, the sleek and compact design of the WNHDE111 facilitates portability, making it an ideal companion for users on the go. Overall, the NETGEAR WNHDE111 5GHz wireless adapter combines speed, performance, and user-friendly features, making it a valuable addition to anyone looking to enhance their wireless connectivity experience. Whether for gaming, streaming, or everyday internet use, this adapter provides a reliable solution for high-speed wireless access.
Top Page Image Contents