NETGEAR WNHDE111 5GHz user manual Wireless Security Options, Other Features That Enhance Security

Page 39

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

Basic security options are listed in order of increasing effectiveness below. For more details on wireless security methods, “Wireless Networking Basics” in Appendix B.

Table 4-1. Wireless Security Options

Security Type

Description

 

 

None.

No wireless security. Recommended only for troubleshooting wireless

 

connectivity. Do not run an unsecured wireless network unless it is your

 

intention to provide free Internet access for the public.

WEP. Wired Equivalent Privacy.

Wired Equivalent Privacy (WEP) data encryption provides moderate

For more information, see “Con-

data security. WEP Shared Key authentication and WEP data encryption

figuring WEP Wireless Security”

can be defeated by a determined eavesdropper using publicly available

on page 4-5.

tools.

 

 

WPA-PSK (TKIP).

Wi-Fi Protected Access with Pre-Shared Key (WPA-PSK and WPA2-

WPA2-PSK (AES).

PSK) data encryption provides extremely strong data security, very

WPA-PSK (TKIP) + WPA2-PSK

effectively blocking eavesdropping. Because WPA and WPA2 are

(AES). Mixed mode.

relatively new standards, older wireless adapters and devices might not

For more information, see “Con-

support them.

figuring WPA Wireless Security”

 

on page 4-6.

 

 

 

Table 4-2. Other Features That Enhance Security

Security Type

Description

 

 

Turn off the broadcast of the

If you disable the broadcast of the SSID, only devices that know the

wireless network name SSID.

correct SSID can connect. This nullifies the wireless network discovery

For more information, see “View-

feature of some products such as Windows XP, but your data is still fully

ing Advanced Wireless Settings”

exposed to an intruder using available wireless eavesdropping tools.

on page 4-6.

 

 

 

Restrict access based on MAC

You can restrict access to only trusted computers so that unknown

address. For more information,

computers cannot wirelessly connect to the Wireless-N AccessPoint/

see “Restricting Wireless Access

Bridge. MAC address filtering adds an obstacle against unwanted access

by MAC Address” on page 4-11.

to your network by the general public, but the data broadcast over the

 

wireless link is fully exposed. This data includes your trusted MAC

 

addresses, which can be read and impersonated by a hacker.

 

 

Use the Push 'N' Connect

Wi-Fi Protected Setup provides easy setup by means of a push button.

feature (Wi-Fi Protected

Older wireless adapters and devices might not support this. Check

Setup). For more information,

whether devices are WPS enabled.

see “Using Push 'N' Connect

 

(Wi-Fi Protected Setup)” on

 

page 4-7.

 

 

 

Securing My Wireless

4-3

v1.1, May 2008

Page 38 Page 40
Image 39
Page 38 Page 40
Contents NETGEAR, Inc WNHDE111 5GHz Wireless-N HD AccessRegulatory Compliance Information Europe EU Declaration of Conformity FCC Requirements for Operation in the United States FCC Information to UserFCC Guidelines for Human Exposure FCC Radio Frequency Interference Warnings & Instructions FCC Declaration Of ConformityModel Number Product and Publication DetailsContents Chapter Securing My Wireless Appendix a Technical Specifications V1.1, May Conventions, Formats, and Scope About This ManualHow to Print This Manual How to Use This ManualRevision History Publication Revision HistoryPart Number Version Date Description Xiv About This Manual Chapter Getting Acquainted Unpacking Your New Wireless-N AccessPoint/BridgePrepare for Installation Illuminated WPS Push N Connect Button Key Hardware FeaturesIlluminated Power LED Front PanelConnectors, Buttons, and Switches Back Panel Connectors, Buttons, and SwitchesKey Back Panel Label Information 1TX18149020CBProduct label information Positioning Your Unit Chapter Easy Secure Wireless Setup My Wireless Devices Setup to Use CommentWhat If Some of My Devices Don’t Support WPS? Access Point Mode WPS Setup WPS Push Button Client Setup WPS PIN Entry Setup of WIreless Clients Setting Up a Pair of WNHDE111 Units at Once Setting Up Two WNHDE111 UnitsAdding a Second WNHDE111 to Your Network Later 1TX18149020CB Connecting Other Devices to a WNHDE111V1.1, May Chapter Making Changes Viewing or Changing SettingsUsing the Smart Wizard Configuration Assistant Names of units discovered Using the Web Browser Interface Using Automatic Firmware Update upon Login V1.1, May V1.1, May V1.1, May Choosing Appropriate Wireless Security Chapter Securing My WirelessSecurity options Range up to 500 foot radius Wireless dataOther Features That Enhance Security Wireless Security OptionsViewing Basic Wireless Settings Changing Wireless Security SettingsConfiguring WEP Wireless Security Configuring WPA Wireless Security Viewing Advanced Wireless SettingsUsing Push N Connect Wi-Fi Protected Setup Push Button Configuration Using the Physical Push ButtonUsing the Software Button in the Add WPS Client Screen Using the Unit’s Security PIN Using the Wireless Client’s Security PINSecurity PIN Entry Enabling Wireless Isolation Adding Additional WPS-Enabled ClientsAdding Additional Non-WPS-Enabled Clients Restricting Wireless Access by MAC Address Select the Turn Access Control On check box Changing the Administrator PasswordUsing the Network Settings Options Chapter Customizing Your Wireless NetworkConfiguring the Access Point Parameters Using the Dhcp Server Wireless Repeating Also Called WDSV1.1, May Optimizing Wireless Performance Chapter Fine-Tuning Your NetworkReduce interference Wireless Intelligent Stream Handling Wish Wish Options This table below describes the Wish optionsUsing WMM QoS for Wireless Multimedia Applications V1.1, May Viewing Status and Log Information Chapter Using Network Management ToolsField Description Device Info Status FieldsWish Logs Traffic Statistics Viewing a List of Attached Devices Backing Up Your Configuration Managing the Configuration FileBacking Up and Restoring the Configuration Upgrading the Software Erasing the ConfigurationUpgrading Manually to New Software Upgrading Automatically to New SoftwareV1.1, May Chapter Troubleshooting Troubleshooting Quick TipsBe sure to restart your network in this sequence Troubleshooting Basic Functions Power light is not on or is blinkingMake sure that the Ethernet cables are securely plugged Wireless or Ethernet port lights are not on Troubleshooting the Web Configuration InterfaceRestoring the Default Configuration and Password Wireless Appendix a Technical SpecificationsDefault Configuration Settings Feature Default Setting LoginEnvironmental Specifications Feature Default SettingPower Adapter Physical SpecificationsRestoring the Default User Name and Password Feature Default Setting Electromagnetic EmissionsInterface Specifications To restore the factory default configuration settings Document Link Appendix B Related DocumentsV1.1, May Index Index-2 Index-3 Index-4

WNHDE111 5GHz specifications

The NETGEAR WNHDE111 is a powerful dual-band wireless adapter designed to enhance connectivity and performance for a variety of devices. Operating on the 5GHz band, this device excels in delivering high-speed wireless connections, making it an excellent choice for users who stream HD videos, play online games, or engage in other bandwidth-intensive activities.

One of the standout features of the WNHDE111 is its support for the Wireless-N technology, which allows for increased data transfer rates and extended range compared to its predecessors. This device is capable of delivering speeds of up to 300 Mbps, ensuring a smooth experience when multiple devices are connected to the network. The dual-band capability means users can switch between the 2.4GHz and 5GHz bands, allowing for optimized usage depending on their connectivity needs.

The WNHDE111 is equipped with MIMO (Multiple Input Multiple Output) technology, which utilizes multiple antennas to send and receive more data simultaneously. This helps to reduce dead spots and improves overall wireless coverage, making it ideal for larger homes or office spaces where signal strength might be an issue.

Installation of the NETGEAR WNHDE111 is straightforward, with a simple plug-and-play setup that doesn’t require advanced technical skills. Users can connect the adapter to their gaming consoles, smart TVs, or computers via USB, making it a versatile solution for various devices. The device is also backward compatible with older wireless standards, ensuring it can connect seamlessly with existing networks.

Security is also a priority for the WNHDE111, supporting the latest encryption methods such as WPA and WPA2 to protect user data from unauthorized access. With easy-to-use security features, users can ensure their networks are secure without compromising on performance.

Moreover, the sleek and compact design of the WNHDE111 facilitates portability, making it an ideal companion for users on the go. Overall, the NETGEAR WNHDE111 5GHz wireless adapter combines speed, performance, and user-friendly features, making it a valuable addition to anyone looking to enhance their wireless connectivity experience. Whether for gaming, streaming, or everyday internet use, this adapter provides a reliable solution for high-speed wireless access.
Top Page Image Contents