Appendix A. Troubleshooting Client IP Addresses
After you have configured your router, you should restart all of the computers connected to the router. This allows each computer to receive all of its network IP address settings.
To verify that the router is providing the correct information, check the router’s status screen:
1.Login to the router’s administration utility by pointing your web browser to http://192.168.123.254 (default address).
2.From the Status screen, click on the View DHCP list button at the bot- tom of the screen.
3.In the DHCP Client List, you should see entries for all of the computers attached to your router.
4.If not, click the Refresh button to update the screen.
If your client computers are still not successful in connecting to the Internet through the router, verify the IP address settings for each computer.
Perform the following to renew the IP addresses of client computers after config- uring your FR1000 Series Router.
A.1 Windows 95/98/Me
You can view and update the IP address set- tings for each computer by running the Microsoft utility, winipcfg:
1.From the Start button, click on Run...
2.In the Run dialog box, type winipcfg and press the Enter key.
3.Select your network adapter card from the
4.To reset the IP address, click the Release All and then the Renew All buttons.
5.Click OK to close the utility.
User’s Manual | 51 |
|
|