NETGEAR WN802T Appendix a Default Settings and Technical Specifications, Factory Default Settings

Page 83

Appendix A Default Settings and Technical Specifications

This appendix provides the factory default settings and technical specifications for the NETGEAR Wireless-N Access Point WN802T v2.

Factory Default Settings

You can use the Reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset.

•To perform a hard reset, push and hold the Reset button for approximately 5 seconds (until the Power LED changes from blinking green to solid amber). Your device will return to the factory configuration settings shown in Table A-1.

•Pressing the Reset button for a shorter period of time will simply cause your device to reboot.

Table A-1. Access Point Default Configuration Settings

Feature

Description

 

 

 

AP Login

 

 

 

 

 

User Login URL

192.168.0.233

 

 

 

 

User Name (case sensitive)

admin

 

 

 

 

Login Password (case sensitive)

password

 

 

 

Ethernet Connection

 

 

 

 

 

Ethernet MAC Address

See rear label.

 

 

 

 

Access Point Mode

On

 

 

 

 

Port Speed

10/100/1000 Mbps

 

 

 

Local Network (LAN)

 

 

 

 

 

Lan IP

192.168.0.233

 

 

 

 

Subnet Mask

255.255.255.0

 

 

 

 

Gateway Address

192.168.0.1

 

 

 

Default Settings and Technical Specifications

A-1

v1.0, September 2008

Page 82 Page 84
Image 83
Page 82 Page 84
Contents NETGEAR, Inc Technical Support Regulatory Compliance Information FCC Guidelines for Human Exposure FCC Information to UserFCC Radio Frequency Interference Warnings & Instructions FCC Declaration Of ConformityProduct and Publication Details Contents Chapter Wireless Security Settings Appendix a Default Settings and Technical Specifications Xii Contents Conventions, Formats and Scope About This ManualHow to Print this Manual How to Use This ManualPart Number Version Date Description Revision HistoryXvi About This Manual Chapter Introduction About the Netgear Wireless-N Access Point WN802TKey Features Radius authentication support System Requirements What is in the BoxFront Panel of the Netgear Wireless-N Access Point Port and system LEDs PowerFeature Detailed Description Reset button Ethernet port Power outlet Back Panel of the Netgear Wireless-N Access PointNetgear Wireless-N Access Point Default Settings Location Label on back panel Wireless Equipment Placement and Range Guidelines Chapter Installation and ConfigurationEthernet Setup Configuring the Netgear Wireless-N Access PointLogin screen Configuring Your Basic Wlan SettingsAccess Point name and Country/Region Local time zone settings Basic IP settings Basic wireless settings Configuring Basic Wireless SettingsNetgear Wireless-N Access Point WN802T v2 Reference Manual Netgear Wireless-N Access Point WN802T v2 Reference Manual QoS settings Configuring QoS SettingsVerifying Basic Wireless Connectivity Configuring WMM Power SaveConfiguring and Testing Your PCs for Wireless Connectivity Deploying the Netgear Wireless-N Access PointEnable Dhcp client Logging in to the Netgear Wireless-N Access PointHttp//192.168.0.233 Default IP address of the WN802TWireless Security Options Chapter Wireless Security SettingsBasic security settings Type a Description Network Authentication TypesData Encryption Type Description Data Encryption Settings802.11b/bg/ng Configuration Ssid and WEP/WPA Settings Setup FormConfiguring WEP Radius Server SettingsConfiguring Wireless Security WEP Data encryption keys Configuring WPA with Radius WPA with Radius security settings WPA2 with Radius security settings Configuring WPA2 with RadiusWPA and WPA2 with Radius security settings Configuring WPA and WPA2 with RadiusWPA-PSK security settings Configuring WPA-PSKWPA2-PSK security settings Configuring WPA2-PSKWPA-PSK and WPA2-PSK security settings Configuring WPA-PSK and WPA2-PSKRestricting Wireless Access by MAC Address Access control list Netgear Wireless-N Access Point WN802T v2 Reference Manual Netgear Wireless-N Access Point WN802T v2 Reference Manual Chapter Management Changing the Administrator PasswordChange password Upgrade firmware browse downloaded file Upgrading the Wireless Access Point FirmwareBackup configuration settings Configuration File ManagementRestore saved configuration settings Rebooting the Netgear Wireless-N Access PointReboot the AP Available wireless stations list Viewing the Available Wireless Stations ListSystem Information fields Field Description Access Point InformationViewing General Summary Information Viewing Network Traffic Statistics Field Description Current IP SettingsCurrent Wireless Settings for 802.11b/bg/ng Statistics Fields Field Description Wired EthernetWireless 11n/g Field Description Configuring the Advanced Wireless SettingsAdvanced wireless settings 10 Radius server settings Configuring the Radius Server SettingsNetgear Wireless-N Access Point WN802T v2 Reference Manual Radius server settings fields Radius Server Settings FieldsNetgear Wireless-N Access Point WN802T v2 Reference Manual Configuring Wireless Multi-Point Bridging Chapter Advanced Wireless BridgingEnable wireless bridging and repeating Edit security profile Segment InternetConfiguring Repeater without Wireless Client Association Repeater without wireless association Netgear Wireless-N Access Point WN802T v2 Reference Manual Netgear Wireless-N Access Point WN802T v2 Reference Manual Offline help Chapter Troubleshooting and HelpWlan light is not lit TroubleshootingNo lights are lit on the access point Ethernet light is not litTurn Radio On button must be selected Cannot configure the access point from a browserRestore Factory Default Settings When I enter a URL or IP address I get a timeout errorNetgear online support links Online HelpNetgear Wireless-N Access Point WN802T v2 Reference Manual Feature Description Appendix a Default Settings and Technical SpecificationsFactory Default Settings Table A-1. Access Point Default Configuration SettingsParameter Netgear Wireless-N Access Point WN802T Technical SpecificationsTable A-2. WN802T v2 Technical Specifications Table A-2. WN802T v2 Technical Specifications Netgear Wireless-N Access Point WN802T v2 Reference Manual Document Link Appendix B Related DocumentsNetgear Wireless-N Access Point WN802T v2 Reference Manual Numerics IndexIndex-2 Netgear Wireless-NAccess Point WN802T v2 Reference Manual Index-4 Index-5 Index-6 Index-7 Index-8
Related manuals
Manual 2 pages 56.75 Kb Manual 68 pages 17.99 Kb

WN802T specifications

The NETGEAR WN802T is a wireless access point that plays a crucial role in enhancing network performance and connectivity in various environments, ranging from small offices to home networks. Designed to deliver a robust wireless experience, the WN802T comes equipped with several features and technologies that set it apart from other devices in its category.

One of its standout characteristics is its compliance with the IEEE 802.11a/b/g wireless standards, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This dual-band capability helps to reduce interference and enhances the overall performance of the network, making it ideal for environments with multiple wireless devices.

The WN802T supports advanced security features, including WPA, WPA2, and WEP encryption protocols. These security measures ensure that the data transmitted over the network remains secure from unauthorized access, providing peace of mind for users concerned about privacy and data protection.

Another key feature is its ability to deliver data transfer rates of up to 300 Mbps, thanks to its support for 802.11n technology. This high-speed connectivity allows users to stream HD videos, engage in online gaming, and transfer large files without noticeable lag or interruptions, making it a strong choice for bandwidth-intensive tasks.

For ease of use, the WN802T includes a web-based setup wizard that facilitates a straightforward installation process. Its user-friendly interface allows both novice and experienced users to configure settings quickly and efficiently, ensuring that the device can be integrated into any existing network with minimal hassle.

The device also includes features such as Quality of Service (QoS), which prioritizes bandwidth allocation for different applications and devices. This ensures that crucial tasks receive the necessary bandwidth, enhancing overall network performance during peak usage times.

Additionally, the WN802T is designed with multiple Ethernet ports, providing the flexibility to connect wired devices such as printers, laptops, and gaming consoles directly to the network. This hybrid capability allows users to take advantage of both wired and wireless connectivity, optimizing the overall network experience.

In summary, the NETGEAR WN802T is a highly functional access point that combines dual-band support, robust security features, high-speed data transfer rates, and user-friendly configuration, making it an exceptional choice for enhancing wireless connectivity in various settings. Its combination of performance and features makes it suitable for a wide array of applications, catering to the needs of users looking for reliable internet access.
Top Page Image Contents