Universal WiFi Range Extender WN3000RP
Hardware Features
Note: For best performance, position antennas pointing up.
Device On/Off button
WPS button
Factory Reset button
Ethernet port
WPS | Link Rate | |
PC to Extender | ||
Status | ||
|
Figure 1. Extender
The LEDs on the front show how the Extender is working:
•
WPS. This LED indicates a WPS wireless connection.
-Solid green. There is wireless security (WPA or WPA2).
-Blinking green. A WPS connection is in progress.
•
PC to Extender. The LED is lit when the Extender is connected to a PC.
•
Status. This LED is lit when the Extender is powered on.
•
Link Rate. This LED indicates a wireless connection between the Extender and the router.
-Green is best.
-Amber is good.
-Red is poor.
The side panel has the following features:
•Ethernet port. You can use this for a wired connection to a computer or other device as described in the User Manual.
•Factory Reset button. To use this button, stick a paper clip into the reset hole and hold it until the Status LED flashes.
•
WPS button. Press the WPS button to wirelessly connect the Extender to your router or wireless adapter.
•Device On/Off button. Turns the device on and off.
Getting Started
5