NETGEAR WGT624 manual Port Connections on the Back, Chapter

				108 Mbps Wireless Router WGT624 v4 Reference Manual
Table 1-1.		Status Lights (continued)
			On	Indicates that the Wireless radio is enabled.
3.	Wireless		Blink	Data is being transferred.
			Off	The wireless router radio is off. (See “Advanced Wireless Settings”
				in Chapter 2.)
			On (Amber)	The Ethernet cable is connected, but the wireless router has not
				received an Internet address.
4.	Internet		On (Green)	The wireless router has an Internet address.
			Blink (Green)	Data is being communicated with the Internet.
			Off	No link is detected on this port.
			On (Green)	The local port is connected to a 100 Mbps device.
5.	LAN (Local Area		Blink (Green)	Data is being transmitted at 100 Mbps.
	Network) Lights		On (Amber)	The local port has detected a link with a 10 Mbps device.
	1–4		Blink (Amber)	Data is being transmitted at 10 Mbps.
			Off	No link is detected on this port.

Port Connections on the Back

1	2
		3	4	5

Figure 1-2

The back of the wireless router has the following port connections:

1.Power adapter port

2.Four local Ethernet (LAN) ports for connecting the local computers

3.Internet port for connecting to a cable or ADSL modem

4.Factory default reset button

5.Wireless antenna

Connecting the Router to the Internet 1-3

v1.2, July 2007