NETGEAR WNDR3400 user manual Security Encryption WEP Key. Enter the Passphrase

	N600 Wireless Dual Band Router WNDR3400 User Manual
Table 2-1. Wireless Settings (continued)
Settings	Description
Security Options	• None. You can use this setting to establish wireless connectivity
	before implementing wireless security. NETGEAR strongly
	recommends that you implement wireless security.
	• WEP (Wired Equivalent Privacy). Use encryption keys and data
	encryption for data security. Select 64-bit or 128-bit encryption.
	See “Configuring WEP Wireless Security.” When you select this
	option, these additional areas appear on your screen:
	• Security Encryption (WEP). Select the Authentication
	Type (Automatic or Shared Key) and the Encryption
	Strength (64 bit or 128 bit).
	• Security Encryption (WEP) Key. Enter the Passphrase,
	select a key, and click Generate.
	• WPA-PSK [TKIP] (WiFi Protected Access Pre-Shared Key).
	Allow only computers configured with WPA to connect to the
	wireless router. When you select this option, this additional area
	appears on your screen:
	• Security Options (WPA-PSK). Enter the WPA
	passphrase (Network key). The passphrase must be
	between 8 and 63 ASCII characters or exactly 64 hex
	digits.
	• WPA2-PSK [AES] (Wi-Fi Protected Access with 2 Pre-Shared
	Keys). Allow only computers configured with WPA2 to connect to
	the wireless router. When you select this option, this additional
	area appears on your screen:
	• Security Options (WPA2-PSK). Enter the WPA
	passphrase (Network key). The passphrase must be
	between 8 and 63 ASCII characters or exactly 64 hex
	digits.
	• WPA-PSK [TKIP] + WPA2-PSK [AES]. Allow computers
	configured with either WPA-PSK or WPA2-PSK security to
	connect to the wireless router. When you select this option, this
	additional area appears on your screen:
	• Security Options (WPA-PSK + WPA2-PSK). Enter the
	WPA passphrase (Network key). The passphrase must
	be between 8 and 63 ASCII characters or exactly 64 hex
	digits.

Safeguarding Your Network 2-7

v1.0, August 2010