Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the wireless access point.
RF Exposure Warning for North America, and Australia
WARNING! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device (see below) must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons. Further, the antennas shall not be colocated with other antenna or radio transmitter.
Antenna Statement for North America and Australia
In addition to its own antenna, the WAG302v2 device has been approved for use with the following detachable antennas and antenna cables:
Approved | Antenna Gain and | Approved Antenna | Antenna Cable | Maximum Transmitted |
Antennas | type | Cable | Length | Powera |
|
|
|
|
|
NETGEAR | 14.5 dBi, directional | NETGEAR | 1.5 m to 30 m | 18 dBm + 14.5 dBi ant. |
ANT24D18v2 | outdoor/indoor | 01 thru 05 |
|
|
|
|
|
|
|
NETGEAR | 9 dBi, | NETGEAR | 1.5 m to 30 m | 18 dBm + 9 dBi ant. |
ANT2409 | omnidirectional | 01 thru 05 |
|
|
| outdoor/indoor |
|
|
|
NETGEAR | 5 dBi, ceiling/wall | NETGEAR | 1.5 m to 30 m | 18 dBm + 5 dBi ant. |
ANT24O5 | indoor | 01 thru 05 |
|
|
a. WAG302v2 maximum radiated power in North America and Australia: 19 dBm – cable loss + antenna gain
Please see the product specifications at http://kbserver.netgear.com/products/wag302.asp for an updated list of wireless accessories approved to be used with the WAG302v2.
Industry Canada Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations ICES 003.
Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur
The device is certified to the requirements of
iv
v1.0, May 2006