You are now wirelessly connected to the Internet! Implement wireless security according
4 Run the Setup Wizard to Connect to the Internetto the instructions in the Wireless chapter of the Reference Manual on the 54 Mbps Wireless Router Resource CD.
Technical Support
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT.
a.The first time you log in to the router, you see this menu. If you do not see this menu, click the Setup Wizard link on the upper left of the main menu.
b.Click Next to proceed. Input your ISP settings, as needed and click Apply to save your settings.
c.Click Test to verify your Internet connection and register your product. If you have trouble connecting to the Internet, use the Troubleshooting Tips below to correct basic problems, or refer to the Reference Manual on the CD.
You are now connected to the Internet!
Now, Set Up Basic Wireless Connectivity
1.In the router Basic Settings section, click Wireless Settings to view this menu. Select a Region. Do not change the other settings. Click Apply to save your changes in the router.
Wireless Feature | Default Setting |
Network Name (SSID) | NETGEAR |
|
|
WEP Security | Disabled |
|
|
2.On your computer that has the wireless adapter, configure its wireless settings to match the router wireless settings exactly.
| |
2 0 1 - 1 0 0 4 4 - 0 2 | January 2004 |
Troubleshooting Tips
Here are some tips for correcting simple problems that prevent you from connecting to the Internet or connecting to the router.
Make sure the wireless settings in the computer and router match exactly
•The Wireless Network Name (SSID), channel, and WEP settings of the router and wireless computer must match exactly.
•Be sure to restart your network in the correct sequence. Follow this sequence. Turn off the modem, router, and computer. Turn on the modem first and wait two minutes. Next turn on the router, and finally the computer.
Be sure to restart your network in the correct sequence
•Follow this sequence. Turn off the modem, router, and computer. Turn on the modem first and wait two minutes. Next turn on the router, and finally the computer.
Make sure the Ethernet cables are securely plugged in
•For each powered on computer connected to the router with a securely plugged in Ethernet cable, the corresponding router LAN port status light will be lit. The label on the bottom of the router identifies the number of each LAN port.
•The Internet port status light on the router will be lit if the Ethernet cable from the router to the modem is plugged in securely and the modem and router are turned on.
Make sure the network settings are correct
•LAN and wirelessly connected computers must be configured to obtain an IP address automatically via DHCP. For instructions on how to do this, please see the animated tutorials on the 54 Mbps Wireless Router Resource CD or Appendix C in the Reference Manual on the CD.
•Some cable modem ISPs require you to set the router to use the MAC address of the computer registered on the account. If so, in the Basic Settings menu Router MAC Address section, select "Use this Computer's MAC address." The router will then capture and use the MAC address of the computer that you are now using. You must be using the computer that is registered with the ISP. Click Apply to save your settings. Restart the network in the correct sequence.
By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades.
NETGEAR, INC.
Support Information
Phone:
See Support information card for other countries.
www.NETGEAR.com
Attention: When you configure the wireless settings of the device 
0560 ! please make sure to select the correct country settings. Due to
802.11b Restrictions: European standards dictate maximum radiated transmit power of
100 mW EIRP and frequency range of 2.400 – 2.4835 GHz. In France, the equipment must be restricted to the 2.4465 – 2.4835 GHz frequency range and must be restricted to indoor use.
©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy and Everybody's connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.