American Power Conversion AIRACPA4000 manual Module of apchw02aos225.bin

Page 19

ADDENDUM

NetworkAIR ACPA4000

®

To use Secure CoPy (SCP) to upgrade the firmware for one Network Management Card:

1.Identify and locate the firmware modules described in the preceding instructions for FTP.

You cannot upgrade the AOS firmware module of any APC device directly from firmware version 1.x.x to 2.1.0 or later. The upgrade attempt will fail.

To upgrade the AOS firmware module of an APC device from version 1.x.x to 2.1.0, use the firmware upgrade tool, a self- extracting executable file available on the NetworkAIR PA Utility CD or available at no cost from the support section of the APC web site (www.apc.com/support).

Each upgrade tool is specific to an APC product type. Do not use the tool from one product CD to upgrade firmware of a different APC product. If you use a version of the tool from the APC Web site, make sure that you use the upgrade tool that corresponds with your APC product type.

If your APC device is running version 2.0.1 or later of the AOS firmware module already, you may upgrade directly to a later 2.x.x version 2.1.0 or a later version.

2.Use an SCP command line to transfer the AOS firmware module to the Network Management Card. The following example assumes a Network Management Card IP address of 158.205.6.185, and an AOS

module of apc_hw02_aos_225.bin.)

scp apc_hw02_aos_225.bin apc@158.205.6.185:apc_hw02_aos_225.bin

3. Use a similar SCP command line, with the name of the application

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Addendum Overview IntroductionOnline Help Configuring Network Management Card settingsInstalling the Wizard System requirementsQuick configuration of the required settings Reconfiguring multiple Network Management Cards Configuring the required TCP/IP settings Using the Network Management Card WizardPre-configuring the Network Management Card Addendum To perform this procedure, the FTP server must be enabled Reconfiguring deployed Network Management CardsAddendum File Transfers Firmware defined Upgrading FirmwareBenefits of upgrading firmware See Firmware files Network Management Card Obtain the latest firmware versionFirmware files Network Management Card Firmware file transfer methods Use FTP or SCP to upgrade one Network Management Card \apcftp Ftp open 150.250.6.10 Module of apchw02aos225.bin Addendum Use Xmodem to upgrade one Network Management Card Use FTP or SCP to upgrade multiple Network Management CardsAddendum Last Transfer Result codes Verifying Upgrades and UpdatesMethods Using Telnet or Web interfacesUsing Snmp Using the Wizard summaryTo verify the update, see Verifying Upgrades and Updates Overview AuthenticationAddendum Files you create for SSL and SSH security Addendum Summary Create a Root Certificate & Server CertificatesProcedure Addendum Addendum Load the server certificate to the Network Management Card Create a Server Certificate and Signing Request Addendum See also Load the server certificate to the Network Management Card Create an SSH Host Key Scp cert.p15 apc@156.205.6.185\sec\hostkey.p15 USA APC Worldwide Customer SupportCopyright

AIRACPA4000 specifications

The American Power Conversion AIRACPA4000 is a state-of-the-art uninterruptible power supply (UPS) designed to protect critical electronic equipment from power disturbances. This unit is tailored for use in environments where reliable power is a necessity, such as data centers, telecommunications facilities, and medical institutions. With its robust design and advanced technology, the AIRACPA4000 ensures that sensitive equipment remains operational during voltage fluctuations, surges, and outages.

One of the main features of the AIRACPA4000 is its high capacity rating of 4000 VA, allowing it to support a wide range of devices and applications. This UPS is equipped with a double-conversion topology, which provides clean and uninterrupted power by constantly converting incoming AC power into DC and then back to AC. This process not only delivers stable power but also eliminates electrical noise that could interfere with sensitive equipment.

The AIRACPA4000 incorporates advanced battery management technology, ensuring that the internal batteries maintain optimal performance and longevity. The unit features hot-swappable batteries, allowing for easy maintenance without downtime. Users can replace batteries while the system remains operational, minimizing disruption to critical processes.

Additionally, the AIRACPA4000 offers a user-friendly interface with an LCD display that provides real-time information on system status, input/output voltage, battery charge level, and load capacity. This allows users to monitor the UPS's performance easily and make informed decisions when it comes to managing power resources.

Connectivity is another significant aspect of the AIRACPA4000. The UPS comes equipped with multiple communication ports, including USB and RS-232 interfaces, which facilitate integration with management software for more extensive monitoring and control capabilities. This enables users to receive alerts and notifications regarding power events, ensuring proactive management of power conditions.

Another noteworthy characteristic is the unit's energy efficiency. The AIRACPA4000 is designed to meet stringent energy efficiency standards, reducing operational costs and environmental impact. Its eco-friendly design not only conserves energy but also promotes sustainability in power management.

In conclusion, the American Power Conversion AIRACPA4000 is a versatile and reliable UPS that caters to the needs of various industries. Its combination of high capacity, advanced technologies, user-friendly interface, and energy efficiency makes it an ideal solution for businesses seeking to safeguard their critical electronic equipment from power issues.
Top Page Image Contents