American Power Conversion AIRACPA4000 manual Using the Network Management Card Wizard

Page 6

ADDENDUM

NetworkAIR ACPA4000

®

Using the Network Management Card Wizard

Configuring the required TCP/IP settings

To configure the Network Management Card’s required TCP/IP settings remotely:

1.Contact your network administrator to obtain valid TCP/IP settings.

2.From the Start menu, launch the Wizard application. The Wizard automatically detects any unconfigured Network Management Cards.

3.Select the Express (Recommended) option from the “Installation Options” screen, and then click Next >.

4.Select the Remotely (over the Network) option from the “Express Configuration” screen, and then click Next >.

5.When the Wizard prompts you for the TCP/IP settings, configure the settings (System IP, Subnet Mask, and Default Gateway addresses).

6.Select the Start a Web browser when finished option to connect over the Web to the NetworkAIR PA Portable Air Conditioner. This launches the default Web browser. Click Finish and wait for a few seconds to let the Management Card restart, which will not interrupt power to the air conditioner.

7.After you enter the correct, IP-formatted information, click Finish to transmit the TCP/IP settings. The Wizard checks to see if the System IP address you entered is in use on the network. If it is discovered as an IP address in use, enter a valid IP address, click Finish, and follow the on-screen instructions.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Addendum Introduction OverviewSystem requirements Configuring Network Management Card settingsInstalling the Wizard Online HelpQuick configuration of the required settings Reconfiguring multiple Network Management Cards Using the Network Management Card Wizard Configuring the required TCP/IP settingsPre-configuring the Network Management Card Addendum Reconfiguring deployed Network Management Cards To perform this procedure, the FTP server must be enabledAddendum File Transfers Upgrading Firmware Firmware definedBenefits of upgrading firmware Obtain the latest firmware version See Firmware files Network Management CardFirmware files Network Management Card Firmware file transfer methods Use FTP or SCP to upgrade one Network Management Card \apcftp Ftp open 150.250.6.10 Module of apchw02aos225.bin Addendum Use FTP or SCP to upgrade multiple Network Management Cards Use Xmodem to upgrade one Network Management CardAddendum Verifying Upgrades and Updates Last Transfer Result codesUsing the Wizard summary Using Telnet or Web interfacesUsing Snmp MethodsTo verify the update, see Verifying Upgrades and Updates Authentication OverviewAddendum Files you create for SSL and SSH security Addendum Create a Root Certificate & Server Certificates SummaryProcedure Addendum Addendum Load the server certificate to the Network Management Card Create a Server Certificate and Signing Request Addendum See also Load the server certificate to the Network Management Card Create an SSH Host Key Scp cert.p15 apc@156.205.6.185\sec\hostkey.p15 APC Worldwide Customer Support USACopyright

AIRACPA4000 specifications

The American Power Conversion AIRACPA4000 is a state-of-the-art uninterruptible power supply (UPS) designed to protect critical electronic equipment from power disturbances. This unit is tailored for use in environments where reliable power is a necessity, such as data centers, telecommunications facilities, and medical institutions. With its robust design and advanced technology, the AIRACPA4000 ensures that sensitive equipment remains operational during voltage fluctuations, surges, and outages.

One of the main features of the AIRACPA4000 is its high capacity rating of 4000 VA, allowing it to support a wide range of devices and applications. This UPS is equipped with a double-conversion topology, which provides clean and uninterrupted power by constantly converting incoming AC power into DC and then back to AC. This process not only delivers stable power but also eliminates electrical noise that could interfere with sensitive equipment.

The AIRACPA4000 incorporates advanced battery management technology, ensuring that the internal batteries maintain optimal performance and longevity. The unit features hot-swappable batteries, allowing for easy maintenance without downtime. Users can replace batteries while the system remains operational, minimizing disruption to critical processes.

Additionally, the AIRACPA4000 offers a user-friendly interface with an LCD display that provides real-time information on system status, input/output voltage, battery charge level, and load capacity. This allows users to monitor the UPS's performance easily and make informed decisions when it comes to managing power resources.

Connectivity is another significant aspect of the AIRACPA4000. The UPS comes equipped with multiple communication ports, including USB and RS-232 interfaces, which facilitate integration with management software for more extensive monitoring and control capabilities. This enables users to receive alerts and notifications regarding power events, ensuring proactive management of power conditions.

Another noteworthy characteristic is the unit's energy efficiency. The AIRACPA4000 is designed to meet stringent energy efficiency standards, reducing operational costs and environmental impact. Its eco-friendly design not only conserves energy but also promotes sustainability in power management.

In conclusion, the American Power Conversion AIRACPA4000 is a versatile and reliable UPS that caters to the needs of various industries. Its combination of high capacity, advanced technologies, user-friendly interface, and energy efficiency makes it an ideal solution for businesses seeking to safeguard their critical electronic equipment from power issues.
Top Page Image Contents