Install the SC101 Software, Troubleshooting Tips

Connect the SC101 to Your Network

1.Connect the provided Ethernet cable to your network and to the back of the SC101. Be sure your network is running. DHCP must be available in the network. DHCP is usually enabled on home networks by default.

2.Plug in the power adapter to a power source and connect the other end to the SC101. View the front panel to verify that the green power light is on and that the yellow network light is on.

B) Install the SC101 Software

Note: This software must be installed on each PC that will access the Storage Central Node.

1. Insert the NETGEAR CD into your PC. If this screen does not appear, run Autorun.exe on the CD. Click Install Software.

2.Click Check for Updates and proceed according to the prompts. The software checks to see if the SC101 is on your network. You can install the software even if the unit is not yet on your network. If Windows logo certification warnings appear, click Continue to proceed.

May 2005

Follow the New Hardware Found prompts to complete the installation of several software driver components. You will see the Storage Central Manager utility icon on your desktop.

3. Run the Storage Central Manager, which can check for updates. Click Next to proceed, and.

follow the prompts to check for and install additional product updates.

After the additional product updates process completes, you will see the Storage Central Manager configuration mode selection screen.

C) Allocate Storage for Each PC That Will Use the SC101

1.Use the Storage Central Manager Wizard Setup option. Click Next to proceed.

2.Follow the on-screen prompts to allocate storage for this PC, setting the size, name, password, and sharing options.

When the wizard is complete, this PC will now have a new drive available that you will see in the Windows Explorer with the drive letter Windows assigned.

Note: If you enable sharing, each computer on the network that will share the drive must have the SC101 software installed.

3. Verify that you can copy files to and from you new SC101 drive.

Note: The SC101 formats hard disks differently than a PC does. Do not

swap hard disks between a SC101 and a PC: the data will be unreadable.

4.Repeat these steps for each PC that will use the SC101 drives.

Refer to the manual for instructions on how to use advanced features such as mirroring.

Troubleshooting Tips

Here are some tips for correcting simple problems you may have.

Always restart your network in this sequence:

1.Turn off and unplug the modem, turn off the router, shut off the SC101, and shut down the computers.

2.Plug in and turn on the cable or DSL modem. Wait about 2 minutes.

3.Turn on the router. Wait about 1 minute.

4.Turn on the SC101.

5.Turn on the computers.

Check the status lights to verify correct operation.

When powered on, the SC101 power light will be on. When connected to an operational Ethernet network, the Ethernet status light will be lit. The label on the SC101 back panel identifies these status lights.

Technical Support

Thank you for selecting NETGEAR products. After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product and use it to register your product at http://www.NETGEAR.com/register.

Hard Drive Not Included

A hard drive is not included with this NETGEAR product. You are solely responsible for the selection, purchase and installation of your own hard drive. By using this NETGEAR product, you understand and agree that (i) NETGEAR is not warranting your hard drive or its contents; and (ii) NETGEAR is not responsible under any circumstances for any damage to or loss of contents that results from the misuse of any hard drive with the NETGEAR product, regardless of the cause of such damage or loss.

Registration on the web site or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product.

Go to http://kbserver.netgear.com for product updates and web support.

© 2005 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

SC101 specifications

The NETGEAR SC101 is a network-attached storage (NAS) device designed to simplify data storage and sharing within a home or small office environment. It provides an efficient solution for users looking to centralize their files, making them accessible from multiple devices connected to the same network.

One of the main features of the SC101 is its user-friendly interface that allows for easy setup and administration. It supports Windows, Mac OS, and Linux operating systems, ensuring compatibility with a wide range of devices. This versatility makes it an attractive choice for households and small businesses that utilize different systems. The SC101 also implements a simple drag-and-drop file management system, enabling users to effortlessly store and retrieve their data.

The device is built with two bays, accommodating standard hard drives that can be customized based on the user's storage needs. This flexibility enables users to start with a single drive and expand their storage capabilities as required. The SC101 supports both RAID 0 and RAID 1 configurations, allowing for a balance between performance and data redundancy. RAID 0 offers enhanced speed, while RAID 1 mirrors data, providing a level of protection against drive failures.

Connectivity is another highlight of the SC101. It features an Ethernet port that connects to the network, with support for various protocols including TCP/IP and UDP. Users can access their files from any computer on the network or even remotely, providing enhanced accessibility for team collaboration or personal use. The built-in web-based management interface also enables users to manage user accounts and permissions, ensuring security and controlled access to data.

In terms of performance, the SC101 utilizes a 480 MHz processor and 64 MB of RAM, which helps in delivering satisfactory performance for file transfers. While it may not compete with modern storage solutions or high-speed drives, it facilitates efficient data retrieval suitable for home and office environments.

Overall, the NETGEAR SC101 is a practical NAS solution that combines central file storage, easy management, and essential data protection features. Its compatibility with various operating systems, support for RAID configurations, and user-friendly setup make it a solid choice for users seeking to enhance their data storage capabilities without the complexity often associated with high-end NAS systems.