NETGEAR SSL312 manual Back Panel

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual

1.LED Power Indicator:

•Off – No power

•On – Power is on.

2.LED Self test Indicator.

•Self test – on while initializing. (~2 minutes)

•Loading Software – blinking while uploading software

•System fault – on (prolonged)

This LED may blink for a minute before going off.

3.Two 10/100M Ethernet ports:

•A solid green LED indicates a connectivity link has been established on either the 10M or 100M interface.

•A blinking green LED indicates activity on either the 10M or 100M interface.

4.Serial Console Port

Male DB-9 serial port for serial DTE connections.

5.Restore to Factory Defaults Button

Back Panel

The SSL VPN Concentrator back panel hardware is shown in Figure 1-2below and consists of the power On/Off switch and the 110-240V power cord connection.

Figure 1-2

Note: Never substitute a power cord. Only use the power cord provided with the SSL VPN Concentrator.

1-4 Introduction

v1.0, August 2006